CISCO-VOICE-ATM-DIAL-CONTROL-MIB :: cvAtmPeerCfgFaxBytes

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-VOICE-ATM-DIAL-CONTROL-MIB › cvAtmPeerCfgFaxBytes

cvAtmPeerCfgFaxBytes

Module: CISCO-VOICE-ATM-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgFaxBytes

OID (numeric): 1.3.6.1.4.1.9.10.35.1.3.1.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the payload size for the fax packets to be transmitted during the call.

What is cvAtmPeerCfgFaxBytes?

This is a read-write integer, from 0 to 240, that sets the payload size used for fax packets transmitted over this ATM peer during a call. An admin tunes this the same way as the voice payload size setting, weighing packetization delay against overhead, but specifically for fax traffic rather than voice. For example, a network engineer troubleshooting slow or failing fax transmissions over the ATM trunk might adjust this value to see if a different payload size improves fax reliability.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.9
snmpwalk -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgFaxBytes

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.9.1
snmpget -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgFaxBytes.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.9.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cvAtmPeerCfgFaxBytes.1

Start monitoring Cisco voice gateway with ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgFaxBytes OID value, configure state conditions and alerts, and monitor any Cisco voice gateway with ATM interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.35ciscoVoiceAtmDialControlMIBCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1ciscoVoiceAtmDialControlMIBObjectsCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3cvAtmDialPeerCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3.1cvAtmPeerCfgTableCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3.1.1cvAtmPeerCfgEntryCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3.1.1.9cvAtmPeerCfgFaxBytesCISCO-VOICE-ATM-DIAL-CONTROL-MIB