CISCO-VOICE-ATM-DIAL-CONTROL-MIB :: cvAtmPeerCfgDtmfRelay

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-VOICE-ATM-DIAL-CONTROL-MIB › cvAtmPeerCfgDtmfRelay

cvAtmPeerCfgDtmfRelay

Module: CISCO-VOICE-ATM-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgDtmfRelay

OID (numeric): 1.3.6.1.4.1.9.10.35.1.3.1.1.13

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies whether or not Dtmf Relay is enabled. If it is then dtmf digits are transported as FRF11 Annex C packets, instead of being encoded as speech.

What is cvAtmPeerCfgDtmfRelay?

This is a read-write true/false setting that turns DTMF relay on or off for this ATM voice peer, and when enabled it causes touch-tone digits to be carried as FRF11 Annex C packets rather than being encoded together with ordinary speech. An admin enables this to prevent low-bitrate voice codecs from distorting DTMF tones, which is critical for callers navigating voicemail systems or IVR menus through the gateway. For example, an admin troubleshooting failed IVR menu selections on ATM trunk calls would check that this object is set to true.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.13
snmpwalk -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgDtmfRelay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.13.1
snmpget -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgDtmfRelay.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.13.1 s <value>

Start monitoring Cisco voice gateway with ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgDtmfRelay OID value, configure state conditions and alerts, and monitor any Cisco voice gateway with ATM interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.35ciscoVoiceAtmDialControlMIBCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1ciscoVoiceAtmDialControlMIBObjectsCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3cvAtmDialPeerCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3.1cvAtmPeerCfgTableCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3.1.1cvAtmPeerCfgEntryCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3.1.1.13cvAtmPeerCfgDtmfRelayCISCO-VOICE-ATM-DIAL-CONTROL-MIB