All MIBs › CISCO-TS-STACK-MIB › ciscoTsTrunkProtocolFilterTranspMode
ciscoTsTrunkProtocolFilterTranspMode
Module: CISCO-TS-STACK-MIB
OID (symbolic): CISCO-TS-STACK-MIB::ciscoTsTrunkProtocolFilterTranspMode
OID (numeric): 1.3.6.1.4.1.9.5.32.8.6.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If this port is in a SRT configured TrCRF, then setting this object will allow transparent bridging of frames in this protocol class. Setting this object to disable disallows transparent bridging of frames in this protocol class. The default value is enable.
What is ciscoTsTrunkProtocolFilterTranspMode?
This read-write enum mirrors ciscoTsProtocolFilterTranspMode's SRT transparent-bridging enable/disable behavior, but scoped to a specific TrCRF on this trunk port rather than the port as a whole, with enable as the default. An admin needing a protocol to be exclusively source-routed within just one TrCRF on an SRT-configured trunk, while leaving normal transparent bridging active for that protocol in other TrCRFs sharing the same trunk, would disable this setting only for the specific TrCRF in question.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.32.8.6.1.3 snmpwalk -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsTrunkProtocolFilterTranspMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.32.8.6.1.3.1 snmpget -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsTrunkProtocolFilterTranspMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.32.8.6.1.3.1 i <value>
Start monitoring Cisco stackable terminal server (async port aggregation, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TS-STACK-MIB::ciscoTsTrunkProtocolFilterTranspMode OID value, configure state conditions and alerts, and monitor any Cisco stackable terminal server (async port aggregation, legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.5 | workgroup | CISCO-ES-STACK-MIB |
| 1.3.6.1.4.1.9.5.32 | tsStack | CISCO-STACK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.5.32.8 | ciscoTsFilter | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.8.6 | ciscoTsTrunkProtocolFilterTable | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.8.6.1 | ciscoTsTrunkProtocolFilterEntry | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.8.6.1.3 | ciscoTsTrunkProtocolFilterTranspMode | CISCO-TS-STACK-MIB |