All MIBs › CISCO-TS-STACK-MIB › ciscoTsTrCRFInfoSpanningTreeBridgeForwardDelay
ciscoTsTrCRFInfoSpanningTreeBridgeForwardDelay
Module: CISCO-TS-STACK-MIB
OID (symbolic): CISCO-TS-STACK-MIB::ciscoTsTrCRFInfoSpanningTreeBridgeForwardDelay
OID (numeric): 1.3.6.1.4.1.9.5.32.6.1.1.4
Node type: OBJECT-TYPE
Type: Timeout
Access: read-write
Description: The value used as the Forwarding Delay in this TrCRF. The range for this parameter is 400 to 3000 and is related to the value of dtrSpanningTreeBridgeMaxAge. See 802.1D-1990 for the relationship between dot1dStpBridgeMaxAge and dot1dStpBridgeForwardDelay. The granularity of this timer is specified to be 1/100 of a second. This agent will return a 'badValue' error if a set is attempted to a value which is not a whole number of seconds.
What is ciscoTsTrCRFInfoSpanningTreeBridgeForwardDelay?
This read-write Timeout sets the Forward Delay timer for this TrCRF's spanning tree instance, valid from 400 to 3000 in units of 1/100 second (4.00 to 30.00 seconds), and the description flags it's related to the TrCRF's Max Age setting per 802.1D-1990, plus that only whole-second values are actually accepted, a set to a non-whole-second value returns badValue. An admin tuning STP convergence speed on a TrCRF with a stable, low-latency topology might lower this toward the minimum to speed up recovery from a topology change, while a larger, more variable network would keep it closer to the standard 15-second default. This timer directly affects how long ports stay in the listening/learning states before forwarding after a topology change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.32.6.1.1.4 snmpwalk -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsTrCRFInfoSpanningTreeBridgeForwardDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.32.6.1.1.4.1 snmpget -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsTrCRFInfoSpanningTreeBridgeForwardDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.32.6.1.1.4.1 s <value>
Start monitoring Cisco stackable terminal server (async port aggregation, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TS-STACK-MIB::ciscoTsTrCRFInfoSpanningTreeBridgeForwardDelay OID value, configure state conditions and alerts, and monitor any Cisco stackable terminal server (async port aggregation, legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.5 | workgroup | CISCO-ES-STACK-MIB |
| 1.3.6.1.4.1.9.5.32 | tsStack | CISCO-STACK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.5.32.6 | ciscoTsVLANS | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.6.1 | ciscoTsTrCRFInfoTable | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.6.1.1 | ciscoTsTrCRFInfoEntry | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.6.1.1.4 | ciscoTsTrCRFInfoSpanningTreeBridgeForwardDelay | CISCO-TS-STACK-MIB |