CISCO-TS-STACK-MIB :: ciscoTsTrBRFInfoIpAddress

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-TS-STACK-MIBciscoTsTrBRFInfoIpAddress

ciscoTsTrBRFInfoIpAddress

Module: CISCO-TS-STACK-MIB

OID (symbolic): CISCO-TS-STACK-MIB::ciscoTsTrBRFInfoIpAddress

OID (numeric): 1.3.6.1.4.1.9.5.32.6.2.1.4

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: IP Address assigned to this TrBRF. Changes to the IP Address of the TrBRF to which the management station belongs cause loss of connectivity until the management station updates its information about the IP Address.

What is ciscoTsTrBRFInfoIpAddress?

This read-write IpAddress assigns the management IP address to this TrBRF, and the description carries an important operational warning: if this is the TrBRF the management station itself is currently using to reach the switch, changing this address will cut off that management session until the station updates its own records to the new address. An admin remotely re-addressing a TrBRF they're currently connected through needs to plan for that temporary loss of reachability, ideally from console access rather than the same session being changed. This is functionally the TrBRF-table equivalent of ciscoTsIpAddr, but explicitly indexed to a specific TrBRF rather than 'the current' one.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.32.6.2.1.4
snmpwalk -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsTrBRFInfoIpAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.32.6.2.1.4.1
snmpget -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsTrBRFInfoIpAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.32.6.2.1.4.1 a <value>

Start monitoring Cisco stackable terminal server (async port aggregation, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TS-STACK-MIB::ciscoTsTrBRFInfoIpAddress OID value, configure state conditions and alerts, and monitor any Cisco stackable terminal server (async port aggregation, legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.5workgroupCISCO-ES-STACK-MIB
1.3.6.1.4.1.9.5.32tsStackCISCO-STACK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.5.32.6ciscoTsVLANSCISCO-TS-STACK-MIB
1.3.6.1.4.1.9.5.32.6.2ciscoTsTrBRFInfoTableCISCO-TS-STACK-MIB
1.3.6.1.4.1.9.5.32.6.2.1ciscoTsTrBRFInfoEntryCISCO-TS-STACK-MIB
1.3.6.1.4.1.9.5.32.6.2.1.4ciscoTsTrBRFInfoIpAddressCISCO-TS-STACK-MIB