All MIBs › CISCO-TS-STACK-MIB › ciscoTsTCPorts
ciscoTsTCPorts
Module: CISCO-TS-STACK-MIB
OID (symbolic): CISCO-TS-STACK-MIB::ciscoTsTCPorts
OID (numeric): 1.3.6.1.4.1.9.5.32.7.1.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The set of ports in this switch which are active in this channel. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of configured ports; the port is not included if its bit has a value of '0'. Set requests containing '1' values in one or more bit positions which do not have a '1' value in the corresponding position in ciscoTsStackSwitchPorts will fail with a 'badValue' error.
The maximum number of ports in a channel and therefore the maximum number of bits in this object containing '1' values is 8.
What is ciscoTsTCPorts?
This read-write OCTET STRING (4 bytes) is a bitmask configuring which ports on this switch are meant to be active members of this TokenChannel, with each bit position mapping to a port number as described elsewhere in this MIB's bitmask convention. An admin building a channel for redundancy or aggregate bandwidth would set the bits for, say, ports 5 and 6 here to bundle them into the same logical channel. This configured membership is distinct from ciscoTsTCActivePorts, which reports which of those configured ports are actually up and participating right now.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.32.7.1.1.3 snmpwalk -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsTCPorts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.32.7.1.1.3.1 snmpget -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsTCPorts.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.32.7.1.1.3.1 s <value>
Start monitoring Cisco stackable terminal server (async port aggregation, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TS-STACK-MIB::ciscoTsTCPorts OID value, configure state conditions and alerts, and monitor any Cisco stackable terminal server (async port aggregation, legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.5 | workgroup | CISCO-ES-STACK-MIB |
| 1.3.6.1.4.1.9.5.32 | tsStack | CISCO-STACK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.5.32.7 | ciscoTsTChannel | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.7.1 | ciscoTsTCTable | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.7.1.1 | ciscoTsTCEntry | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.7.1.1.3 | ciscoTsTCPorts | CISCO-TS-STACK-MIB |