CISCO-TS-STACK-MIB :: ciscoTsStackSwitchStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-TS-STACK-MIBciscoTsStackSwitchStatus

ciscoTsStackSwitchStatus

Module: CISCO-TS-STACK-MIB

OID (symbolic): CISCO-TS-STACK-MIB::ciscoTsStackSwitchStatus

OID (numeric): 1.3.6.1.4.1.9.5.32.2.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Operational status of the box. Setting this value to either coldReset(2) or warmReset(3) will cause cold start or warm start to occur after a predefined time delay.

What is ciscoTsStackSwitchStatus?

This read-write enum reports the operational status of this specific box (running(1)) and, when set to coldReset(2) or warmReset(3), causes just that one box to cold- or warm-start after a predefined delay, unlike ciscoTsStackReset which resets the whole stack. An admin wanting to recover a single misbehaving switch in a stack without disturbing its stack-mates would target warmReset(3) here on that switch's row specifically. This per-switch granularity is what lets an admin avoid an unnecessary full-stack outage for a one-switch problem.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.32.2.1.1.7
snmpwalk -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsStackSwitchStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.32.2.1.1.7.1
snmpget -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsStackSwitchStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.32.2.1.1.7.1 i <value>

Start monitoring Cisco stackable terminal server (async port aggregation, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TS-STACK-MIB::ciscoTsStackSwitchStatus OID value, configure state conditions and alerts, and monitor any Cisco stackable terminal server (async port aggregation, legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.5workgroupCISCO-ES-STACK-MIB
1.3.6.1.4.1.9.5.32tsStackCISCO-STACK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.5.32.2ciscoTsStackCISCO-TS-STACK-MIB
1.3.6.1.4.1.9.5.32.2.1ciscoTsStackTableCISCO-TS-STACK-MIB
1.3.6.1.4.1.9.5.32.2.1.1ciscoTsStackEntryCISCO-TS-STACK-MIB
1.3.6.1.4.1.9.5.32.2.1.1.7ciscoTsStackSwitchStatusCISCO-TS-STACK-MIB