All MIBs › CISCO-TS-STACK-MIB › ciscoTsMACDestFilterExitMask
ciscoTsMACDestFilterExitMask
Module: CISCO-TS-STACK-MIB
OID (symbolic): CISCO-TS-STACK-MIB::ciscoTsMACDestFilterExitMask
OID (numeric): 1.3.6.1.4.1.9.5.32.8.3.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The set of output ports to which a limited multicast filter is applied. This object only has a value for Limited Multicast filters. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
What is ciscoTsMACDestFilterExitMask?
This read-write OCTET STRING (4 bytes) specifies the set of output ports a limited-multicast filter, ciscoTsMACDestFilterType set to limited-multicast(3), is allowed to forward that multicast destination out through, and the description notes this object only has meaning for that specific filter type, it's otherwise unused. An admin restricting a specific multicast stream to only reach a defined set of subscriber ports, rather than flooding it everywhere, would configure this exit mask to exactly those ports. Setting this without also setting the filter type to limited-multicast(3) would have no effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.32.8.3.1.5 snmpwalk -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsMACDestFilterExitMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.32.8.3.1.5.1 snmpget -v2c -c public <target> CISCO-TS-STACK-MIB::ciscoTsMACDestFilterExitMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.32.8.3.1.5.1 s <value>
Start monitoring Cisco stackable terminal server (async port aggregation, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TS-STACK-MIB::ciscoTsMACDestFilterExitMask OID value, configure state conditions and alerts, and monitor any Cisco stackable terminal server (async port aggregation, legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.5 | workgroup | CISCO-ES-STACK-MIB |
| 1.3.6.1.4.1.9.5.32 | tsStack | CISCO-STACK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.5.32.8 | ciscoTsFilter | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.8.3 | ciscoTsMACDestFilterTable | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.8.3.1 | ciscoTsMACDestFilterEntry | CISCO-TS-STACK-MIB |
| 1.3.6.1.4.1.9.5.32.8.3.1.5 | ciscoTsMACDestFilterExitMask | CISCO-TS-STACK-MIB |