All MIBs › CISCO-TRUSTSEC-MIB › ctsCacheNvStorage
ctsCacheNvStorage
Module: CISCO-TRUSTSEC-MIB
OID (symbolic): CISCO-TRUSTSEC-MIB::ctsCacheNvStorage
OID (numeric): 1.3.6.1.4.1.9.9.730.1.1.2
Node type: OBJECT-TYPE
Type: SnmpAdminString
Access: read-write
Description: The object specifies the location on the device
where TrustSec cache files will be created.
The location may be specified in
What is ctsCacheNvStorage?
This read-write setting specifies the device and directory location (e.g. bootdisk:, disk0:) where TrustSec cache files are stored.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.730.1.1.2 snmpwalk -v2c -c public <target> CISCO-TRUSTSEC-MIB::ctsCacheNvStorage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.730.1.1.2.1 snmpget -v2c -c public <target> CISCO-TRUSTSEC-MIB::ctsCacheNvStorage.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.730.1.1.2.1 s <value>
Start monitoring Cisco switches/routers with TrustSec support with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TRUSTSEC-MIB::ctsCacheNvStorage OID value, configure state conditions and alerts, and monitor any Cisco switches/routers with TrustSec support from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.730 | ciscoTrustSecMIB | CISCO-TRUSTSEC-MIB |
| 1.3.6.1.4.1.9.9.730.1 | ciscoTrustSecMIBObjects | CISCO-TRUSTSEC-MIB |
| 1.3.6.1.4.1.9.9.730.1.1 | ctsCacheObjects | CISCO-TRUSTSEC-MIB |
| 1.3.6.1.4.1.9.9.730.1.1.2 | ctsCacheNvStorage | CISCO-TRUSTSEC-MIB |