CISCO-TRUSTSEC-INTERFACE-MIB :: ctsiIfDot1xReauthTimeLeft

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-TRUSTSEC-INTERFACE-MIBctsiIfDot1xReauthTimeLeft

ctsiIfDot1xReauthTimeLeft

Module: CISCO-TRUSTSEC-INTERFACE-MIB

OID (symbolic): CISCO-TRUSTSEC-INTERFACE-MIB::ctsiIfDot1xReauthTimeLeft

OID (numeric): 1.3.6.1.4.1.9.9.740.1.2.1.1.6

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This object indicates the leftover time of the current authentication session.

A value of zero indicates the re-authentication is in progress.

A value of -1 indicates that this object is not applicable on this interface.

What is ctsiIfDot1xReauthTimeLeft?

This read-only object reports the remaining time before the current 802.1x authentication session must re-authenticate; zero means re-authentication is already underway and -1 means not applicable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.740.1.2.1.1.6
snmpwalk -v2c -c public <target> CISCO-TRUSTSEC-INTERFACE-MIB::ctsiIfDot1xReauthTimeLeft

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.740.1.2.1.1.6.1
snmpget -v2c -c public <target> CISCO-TRUSTSEC-INTERFACE-MIB::ctsiIfDot1xReauthTimeLeft.1

Start monitoring Cisco network equipment (TrustSec interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TRUSTSEC-INTERFACE-MIB::ctsiIfDot1xReauthTimeLeft OID value, configure state conditions and alerts, and monitor any Cisco network equipment (TrustSec interfaces) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.740ciscoTrustSecIfMIBCISCO-TRUSTSEC-INTERFACE-MIB
1.3.6.1.4.1.9.9.740.1ciscoTrustSecIfMIBObjectsCISCO-TRUSTSEC-INTERFACE-MIB
1.3.6.1.4.1.9.9.740.1.2ctsiIfDot1xObjectsCISCO-TRUSTSEC-INTERFACE-MIB
1.3.6.1.4.1.9.9.740.1.2.1ctsiIfDot1xTableCISCO-TRUSTSEC-INTERFACE-MIB
1.3.6.1.4.1.9.9.740.1.2.1.1ctsiIfDot1xEntryCISCO-TRUSTSEC-INTERFACE-MIB
1.3.6.1.4.1.9.9.740.1.2.1.1.6ctsiIfDot1xReauthTimeLeftCISCO-TRUSTSEC-INTERFACE-MIB