All MIBs › CISCO-TRUSTSEC-INTERFACE-MIB › ctsiIfConfiguredMode
ctsiIfConfiguredMode
Module: CISCO-TRUSTSEC-INTERFACE-MIB
OID (symbolic): CISCO-TRUSTSEC-INTERFACE-MIB::ctsiIfConfiguredMode
OID (numeric): 1.3.6.1.4.1.9.9.740.1.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the TrustSec mode currently configured on the interface. Each mode may have a corresponding entry in its corresponding configuration table.
unknown - The configured TrustSec mode is none of the following.
none - TrustSec is not configured in any mode.
dot1x - TrustSec dot1x mode is configured for this interface. TrustSec system will use 802.1x for authentication, RADIUS for authorization and SAP negotiation for SA parameter.
manual - TrustSec manual mode is configured for this interface. The authentication was bypassed in manual mode. User needs to manually to configure the policy and the SAP negotiation parameter.
l3Forward - TrustSec L3 forwarding mode is configured for this interface.
What is ctsiIfConfiguredMode?
This read-only object shows which TrustSec mode is currently configured on the interface, linking to the corresponding mode-specific configuration table, or 'unknown'/'none' if not set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.740.1.1.1.1.2 snmpwalk -v2c -c public <target> CISCO-TRUSTSEC-INTERFACE-MIB::ctsiIfConfiguredMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.740.1.1.1.1.2.1 snmpget -v2c -c public <target> CISCO-TRUSTSEC-INTERFACE-MIB::ctsiIfConfiguredMode.1
Start monitoring Cisco network equipment (TrustSec interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TRUSTSEC-INTERFACE-MIB::ctsiIfConfiguredMode OID value, configure state conditions and alerts, and monitor any Cisco network equipment (TrustSec interfaces) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.740 | ciscoTrustSecIfMIB | CISCO-TRUSTSEC-INTERFACE-MIB |
| 1.3.6.1.4.1.9.9.740.1 | ciscoTrustSecIfMIBObjects | CISCO-TRUSTSEC-INTERFACE-MIB |
| 1.3.6.1.4.1.9.9.740.1.1 | ctsiIfConfigObjects | CISCO-TRUSTSEC-INTERFACE-MIB |
| 1.3.6.1.4.1.9.9.740.1.1.1 | ctsiIfConfigTable | CISCO-TRUSTSEC-INTERFACE-MIB |
| 1.3.6.1.4.1.9.9.740.1.1.1.1 | ctsiIfConfigEntry | CISCO-TRUSTSEC-INTERFACE-MIB |
| 1.3.6.1.4.1.9.9.740.1.1.1.1.2 | ctsiIfConfiguredMode | CISCO-TRUSTSEC-INTERFACE-MIB |