All MIBs › CISCO-TAP2-MIB › cTap2MediationCapabilities
cTap2MediationCapabilities
Module: CISCO-TAP2-MIB
OID (symbolic): CISCO-TAP2-MIB::cTap2MediationCapabilities
OID (numeric): 1.3.6.1.4.1.9.9.399.1.1.3
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description:
This object displays the device capabilities with respect to certain fields in Mediation Device table. This may be dependent on hardware capabilities, software capabilities. The following values may be supported: ipV4SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTap2MediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv4 address Mediation Device.
ipV6SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTap2MediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv6 address Mediation Device.
udp: UDP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device.
rtcpNack: RTP with Nack resilience may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device.
tcp: TCP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device.
sctp: SCTP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device.
rtp: RTP may be used as transport protocol (denoted by cTap2MediationTransport) in transferring intercepted data to the Mediation Device.
What is cTap2MediationCapabilities?
This object lists the lawful intercept capabilities supported by the mediation device, such as which packet types or protocols can be captured and forwarded to law enforcement. It allows management systems to verify what interception modes are available before configuring tap points. Network operators with lawful intercept obligations would query this to ensure compliance requirements can be met by the mediation infrastructure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.399.1.1.3 snmpwalk -v2c -c public <target> CISCO-TAP2-MIB::cTap2MediationCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.399.1.1.3.1 snmpget -v2c -c public <target> CISCO-TAP2-MIB::cTap2MediationCapabilities.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.399 | ciscoTap2MIB | CISCO-TAP2-MIB |
| 1.3.6.1.4.1.9.9.399.1 | ciscoTap2MIBObjects | CISCO-TAP2-MIB |
| 1.3.6.1.4.1.9.9.399.1.1 | cTap2MediationGroup | CISCO-TAP2-MIB |
| 1.3.6.1.4.1.9.9.399.1.1.3 | cTap2MediationCapabilities | CISCO-TAP2-MIB |