Description: This object displays what types of intercept streams can be configured on this type of device. This may be dependent on hardware capabilities, software capabilities. The following fields may be supported: interface: SNMP ifIndex Value may be used to select interception of all data crossing an interface or set of interfaces. tapEnable: set if table entries with cTapStreamIpInterceptEnable set to 'false' are used to pre-screen packets for intercept; otherwise these entries are ignored. ipV4: IPv4 Address or prefix may be used to select traffic to be intercepted. ipV6: IPv6 Address or prefix may be used to select traffic to be intercepted. l4Port: TCP/UDP Ports may be used to select traffic to be intercepted. dscp: DSCP may be used to select traffic to be intercepted. dstMacAddr: Destination MAC Address may be used to select traffic to be intercepted. srcMacAddr: Source MAC Address may be used to select traffic to be intercepted. ethernetPid: Ethernet Protocol Identifier may be used to select traffic to be intercepted. dstLlcSap: IEEE 802.2 Destination SAP may be used to select traffic to be intercepted. srcLlcSap: IEEE 802.2 Source SAP may be used to select traffic to be intercepted.