All MIBs › CISCO-TAP-MIB › cTapMediationCapabilities
cTapMediationCapabilities
Module: CISCO-TAP-MIB
OID (symbolic): CISCO-TAP-MIB::cTapMediationCapabilities
OID (numeric): 1.3.6.1.4.1.9.9.252.1.1.3
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object displays the device capabilities with respect to certain fields in Mediation Device table. This may be dependent on hardware capabilities, software capabilities. The following values may be supported: ipV4SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTapMediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv4 address Mediation Device.
ipV6SrcInterface: SNMP ifIndex Value may be used to select the interface (denoted by cTapMediationSrcInterface) on the intercepting device from which to transmit intercepted data to an IPv6 address Mediation Device.
udp: UDP may be used as transport protocol (denoted by cTapMediationTransport) in transferring intercepted data to the Mediation Device.
rtcpNack: RTP with Nack resilience may be used as transport protocol (denoted by cTapMediationTransport) in transferring intercepted data to the Mediation Device.
tcp: TCP may be used as transport protocol (denoted by cTapMediationTransport) in transferring intercepted data to the Mediation Device.
sctp: SCTP may be used as transport protocol (denoted by cTapMediationTransport) in transferring intercepted data to the Mediation Device.
What is cTapMediationCapabilities?
This read-only object reports which mediation-device table features (such as whether an ifIndex can be used as the source interface) the device supports, based on its hardware and software capabilities.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.252.1.1.3 snmpwalk -v2c -c public <target> CISCO-TAP-MIB::cTapMediationCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.252.1.1.3.1 snmpget -v2c -c public <target> CISCO-TAP-MIB::cTapMediationCapabilities.1
Start monitoring Cisco network equipment (legacy lawful-intercept) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-TAP-MIB::cTapMediationCapabilities OID value, configure state conditions and alerts, and monitor any Cisco network equipment (legacy lawful-intercept) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.252 | cTapMIB | CISCO-TAP-MIB |
| 1.3.6.1.4.1.9.9.252.1 | cTapMIBObjects | CISCO-TAP-MIB |
| 1.3.6.1.4.1.9.9.252.1.1 | cTapMediationGroup | CISCO-TAP-MIB |
| 1.3.6.1.4.1.9.9.252.1.1.3 | cTapMediationCapabilities | CISCO-TAP-MIB |