All MIBs › CISCO-SYSLOG-MIB › clogMaxSeverity
clogMaxSeverity
Module: CISCO-SYSLOG-MIB
OID (symbolic): CISCO-SYSLOG-MIB::clogMaxSeverity
OID (numeric): 1.3.6.1.4.1.9.9.41.1.1.3
Node type: OBJECT-TYPE
Type: SyslogSeverity
Access: read-write
Description:
Indicates which syslog severity levels will be processed. Any syslog message with a severity value greater than this value will be ignored by the agent. note: severity numeric values increase as their severity decreases, e.g. 'error' is more severe than 'debug'.
What is clogMaxSeverity?
A read-write setting defining the highest severity threshold for syslog processing; messages with a severity value greater than this (i.e. less severe) are ignored by the agent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.41.1.1.3 snmpwalk -v2c -c public <target> CISCO-SYSLOG-MIB::clogMaxSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.41.1.1.3.1 snmpget -v2c -c public <target> CISCO-SYSLOG-MIB::clogMaxSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.41.1.1.3.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> clogMaxSeverity.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.41 | ciscoSyslogMIB | CISCO-SYSLOG-MIB |
| 1.3.6.1.4.1.9.9.41.1 | ciscoSyslogMIBObjects | CISCO-SYSLOG-MIB |
| 1.3.6.1.4.1.9.9.41.1.1 | clogBasic | CISCO-SYSLOG-MIB |
| 1.3.6.1.4.1.9.9.41.1.1.3 | clogMaxSeverity | CISCO-SYSLOG-MIB |