All MIBs › CISCO-STP-EXTENSIONS-MIB › stpxSpanningTreePathCostOperMode
stpxSpanningTreePathCostOperMode
Module: CISCO-STP-EXTENSIONS-MIB
OID (symbolic): CISCO-STP-EXTENSIONS-MIB::stpxSpanningTreePathCostOperMode
OID (numeric): 1.3.6.1.4.1.9.9.82.1.6.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicate the operational spanning tree path cost mode on device. This mode applies to all instances of the Spanning Tree protocol running on the device.
When the value of this MIB object gets changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed.
When the value of this MIB object is long(2), the stpxLongStpPortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32 bits value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of stpxLongStpPortPathCost for the same instance exceeds 65535.
When the value of this MIB object is short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used.
What is stpxSpanningTreePathCostOperMode?
Read-only value reporting the operational spanning tree path cost mode applied across all Spanning Tree instances on the device; changing it triggers reassignment of default path costs on all ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.82.1.6.7 snmpwalk -v2c -c public <target> CISCO-STP-EXTENSIONS-MIB::stpxSpanningTreePathCostOperMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.82.1.6.7.1 snmpget -v2c -c public <target> CISCO-STP-EXTENSIONS-MIB::stpxSpanningTreePathCostOperMode.1
Start monitoring Cisco Catalyst switch (STP extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STP-EXTENSIONS-MIB::stpxSpanningTreePathCostOperMode OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (STP extensions) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.82 | ciscoStpExtensionsMIB | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1 | stpxObjects | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1.6 | stpxSpanningTreeObjects | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1.6.7 | stpxSpanningTreePathCostOperMode | CISCO-STP-EXTENSIONS-MIB |