CISCO-STP-EXTENSIONS-MIB :: stpxSMSTPortAdminHelloTime

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-STP-EXTENSIONS-MIBstpxSMSTPortAdminHelloTime

stpxSMSTPortAdminHelloTime

Module: CISCO-STP-EXTENSIONS-MIB

OID (symbolic): CISCO-STP-EXTENSIONS-MIB::stpxSMSTPortAdminHelloTime

OID (numeric): 1.3.6.1.4.1.9.9.82.1.14.7.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The adminitratively configured hello time in hundredth of seconds on a port for IEEE MST. The granularity of this timer is 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. This object value of zero means the hello time is not specifically configured on this port and object value of stpxSMSTPortConfigedHelloTime retrieved for this port will take on the value of dot1dStpBridgeHelloTime defined in BRIDGE-MIB.

What is stpxSMSTPortAdminHelloTime?

The administratively configured hello timer (in hundredths of a second, effectively whole seconds) that controls how often IEEE MST BPDUs are sent on a port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.82.1.14.7.1.3
snmpwalk -v2c -c public <target> CISCO-STP-EXTENSIONS-MIB::stpxSMSTPortAdminHelloTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.82.1.14.7.1.3.1
snmpget -v2c -c public <target> CISCO-STP-EXTENSIONS-MIB::stpxSMSTPortAdminHelloTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.82.1.14.7.1.3.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> stpxSMSTPortAdminHelloTime.1

Start monitoring Cisco Catalyst switch (STP extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STP-EXTENSIONS-MIB::stpxSMSTPortAdminHelloTime OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (STP extensions) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.82ciscoStpExtensionsMIBCISCO-STP-EXTENSIONS-MIB
1.3.6.1.4.1.9.9.82.1stpxObjectsCISCO-STP-EXTENSIONS-MIB
1.3.6.1.4.1.9.9.82.1.14stpxSMSTObjectsCISCO-STP-EXTENSIONS-MIB
1.3.6.1.4.1.9.9.82.1.14.7stpxSMSTPortTableCISCO-STP-EXTENSIONS-MIB
1.3.6.1.4.1.9.9.82.1.14.7.1stpxSMSTPortEntryCISCO-STP-EXTENSIONS-MIB
1.3.6.1.4.1.9.9.82.1.14.7.1.3stpxSMSTPortAdminHelloTimeCISCO-STP-EXTENSIONS-MIB