CISCO-STP-EXTENSIONS-MIB :: stpxRSTPPortAdminLinkType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-STP-EXTENSIONS-MIBstpxRSTPPortAdminLinkType

stpxRSTPPortAdminLinkType

Module: CISCO-STP-EXTENSIONS-MIB

OID (symbolic): CISCO-STP-EXTENSIONS-MIB::stpxRSTPPortAdminLinkType

OID (numeric): 1.3.6.1.4.1.9.9.82.1.12.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indicates the administrative link type configuration of a bridge port for the RSTP protocol.

pointToPoint -- the port is administratively configured to be connected to a point-to-point link.

shared -- the port is administratively configured to be connected to a shared medium.

auto -- the administrative configuration of the port's link type depends on link duplex of the port. If the port link is full-duplex, the administrative link type configuration on this port will be taken as pointTopoint(1). If the port link is half-duplex, the administrative link type configuration on this port will be taken as shared(2).

This configuration of this object only takes effect when the stpxSpanningTreeType is mst(4) or rapidPvstPlus(5).

What is stpxRSTPPortAdminLinkType?

A read-write setting for the administratively configured link type (point-to-point or shared medium) of a bridge port running RSTP.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.82.1.12.1.1.2
snmpwalk -v2c -c public <target> CISCO-STP-EXTENSIONS-MIB::stpxRSTPPortAdminLinkType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.82.1.12.1.1.2.1
snmpget -v2c -c public <target> CISCO-STP-EXTENSIONS-MIB::stpxRSTPPortAdminLinkType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.82.1.12.1.1.2.1 i <value>

Start monitoring Cisco Catalyst switch (STP extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STP-EXTENSIONS-MIB::stpxRSTPPortAdminLinkType OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (STP extensions) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.82ciscoStpExtensionsMIBCISCO-STP-EXTENSIONS-MIB
1.3.6.1.4.1.9.9.82.1stpxObjectsCISCO-STP-EXTENSIONS-MIB
1.3.6.1.4.1.9.9.82.1.12stpxRSTPObjectsCISCO-STP-EXTENSIONS-MIB
1.3.6.1.4.1.9.9.82.1.12.1stpxRSTPPortTableCISCO-STP-EXTENSIONS-MIB
1.3.6.1.4.1.9.9.82.1.12.1.1stpxRSTPPortEntryCISCO-STP-EXTENSIONS-MIB
1.3.6.1.4.1.9.9.82.1.12.1.1.2stpxRSTPPortAdminLinkTypeCISCO-STP-EXTENSIONS-MIB