All MIBs › CISCO-STP-EXTENSIONS-MIB › stpxPreferredVlansMap3k
stpxPreferredVlansMap3k
Module: CISCO-STP-EXTENSIONS-MIB
OID (symbolic): CISCO-STP-EXTENSIONS-MIB::stpxPreferredVlansMap3k
OID (numeric): 1.3.6.1.4.1.9.9.82.1.2.1.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet.
For each VLAN, if it is preferred on this trunk port, then the bit corresponding to that VLAN is set to '1'. The default value is 128 bytes of zeros.
To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo.
What is stpxPreferredVlansMap3k?
Read-write bitmap extending stpxPreferredVlansMap to cover VLANs with index 2048-3071, marking which of these VLANs are preferred on this trunk port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.82.1.2.1.1.3 snmpwalk -v2c -c public <target> CISCO-STP-EXTENSIONS-MIB::stpxPreferredVlansMap3k
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.82.1.2.1.1.3.1 snmpget -v2c -c public <target> CISCO-STP-EXTENSIONS-MIB::stpxPreferredVlansMap3k.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.82.1.2.1.1.3.1 s <value>
Start monitoring Cisco Catalyst switch (STP extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STP-EXTENSIONS-MIB::stpxPreferredVlansMap3k OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (STP extensions) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.82 | ciscoStpExtensionsMIB | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1 | stpxObjects | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1.2 | stpxVlanObjects | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1.2.1 | stpxPreferredVlansTable | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1.2.1.1 | stpxPreferredVlansEntry | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1.2.1.1.3 | stpxPreferredVlansMap3k | CISCO-STP-EXTENSIONS-MIB |