All MIBs › CISCO-STP-EXTENSIONS-MIB › stpxLoopGuardConfigEnabled
stpxLoopGuardConfigEnabled
Module: CISCO-STP-EXTENSIONS-MIB
OID (symbolic): CISCO-STP-EXTENSIONS-MIB::stpxLoopGuardConfigEnabled
OID (numeric): 1.3.6.1.4.1.9.9.82.1.8.1.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: An indication of whether the LoopGuard capability is enabled on this port or not. This configuration will be applied to all the Spanning Tree instances in which this port exists.
In order to support additional Loop Guard config mode (default) as defined in stpxLoopGuardConfigMode other than enable (true(1)) or disable (false(2)) as defined in this object, stpxLoopGuardConfigMode object needs to be used.
When the stpxLoopGuardConfigMode object has the value of enable(1), the value of stpxLoopGuardConfigEnabled for the same instance will be true(1). When the stpxLoopGuardConfigMode object has the value of disable(2), the value of stpxLoopGuardConfigEnabled for the same instance will be false(2). When the stpxLoopGuardConfigMode object has the value of default(3), the value of stpxLoopGuardConfigEnabled for the same instance will depend on the object value of stpxLoopGuardGlobalDefaultMode.
What is stpxLoopGuardConfigEnabled?
Read-write setting that enables or disables the Loop Guard feature on a port, applying across all Spanning Tree instances the port belongs to.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.82.1.8.1.1.2 snmpwalk -v2c -c public <target> CISCO-STP-EXTENSIONS-MIB::stpxLoopGuardConfigEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.82.1.8.1.1.2.1 snmpget -v2c -c public <target> CISCO-STP-EXTENSIONS-MIB::stpxLoopGuardConfigEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.82.1.8.1.1.2.1 s <value>
Start monitoring Cisco Catalyst switch (STP extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STP-EXTENSIONS-MIB::stpxLoopGuardConfigEnabled OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (STP extensions) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.82 | ciscoStpExtensionsMIB | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1 | stpxObjects | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1.8 | stpxLoopGuardObjects | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1.8.1 | stpxLoopGuardConfigTable | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1.8.1.1 | stpxLoopGuardConfigEntry | CISCO-STP-EXTENSIONS-MIB |
| 1.3.6.1.4.1.9.9.82.1.8.1.1.2 | stpxLoopGuardConfigEnabled | CISCO-STP-EXTENSIONS-MIB |