All MIBs › CISCO-SRP-MIB › srpRingIntUcastLowPriPktsIn
srpRingIntUcastLowPriPktsIn
Module: CISCO-SRP-MIB
OID (symbolic): CISCO-SRP-MIB::srpRingIntUcastLowPriPktsIn
OID (numeric): 1.3.6.1.4.1.9.10.60.2.2.1.4
Node type: OBJECT-TYPE
Type: PerfIntervalCount64
Access: read-only
Description: The counter associated with the number of low priority unicast packets received from the Physical medium dependent layer in a particular 15-minute interval in the past 24 hours.
What is srpRingIntUcastLowPriPktsIn?
This is a 64-bit counter of unicast frames (packet count) arriving off the fiber into this node, specifically the low-priority portion of that traffic, per SRP's two-level QoS scheme, measured over one specific, already-completed 15-minute bucket from the rolling 24-hour history, rather than a live count. Because this is measured on the fiber side, it includes traffic this node is simply relaying past on behalf of other ring nodes, not just traffic this router itself originates or consumes, because SRP always drains high-priority traffic first, a plateau or drop in this low-priority counter while the matching high-priority counter is climbing indicates best-effort traffic is being squeezed out by real-time/control traffic rather than genuinely dropping off, with unicast traffic being the more direct proxy for ordinary point-to-point application load between specific ring nodes. For instance, this counter might read 819,019 unicast LowPri packets over that window on a moderately busy ring node.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.2.1.4 snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpRingIntUcastLowPriPktsIn
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.2.1.4.1 snmpget -v2c -c public <target> CISCO-SRP-MIB::srpRingIntUcastLowPriPktsIn.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> srpRingIntUcastLowPriPktsIn.1
Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpRingIntUcastLowPriPktsIn OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.60 | ciscosrpMIB | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2 | srpRingCounters | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2.2 | srpRingCountersIntervalTable | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2.2.1 | srpRingCountersIntervalEntry | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2.2.1.4 | srpRingIntUcastLowPriPktsIn | CISCO-SRP-MIB |