All MIBs › CISCO-SRP-MIB › srpRingIntUcastHighPriPktsIn
srpRingIntUcastHighPriPktsIn
Module: CISCO-SRP-MIB
OID (symbolic): CISCO-SRP-MIB::srpRingIntUcastHighPriPktsIn
OID (numeric): 1.3.6.1.4.1.9.10.60.2.2.1.8
Node type: OBJECT-TYPE
Type: PerfIntervalCount64
Access: read-only
Description: The counter associated with the number of high priority unicast packets received from the Physical medium dependent layer in a particular 15-minute interval in the past 24 hours.
What is srpRingIntUcastHighPriPktsIn?
This is a 64-bit counter of unicast frames (packet count) arriving off the fiber into this node, specifically the high-priority portion of that traffic, per SRP's two-level QoS scheme, measured over one specific, already-completed 15-minute bucket from the rolling 24-hour history, rather than a live count. Because this is measured on the fiber side, it includes traffic this node is simply relaying past on behalf of other ring nodes, not just traffic this router itself originates or consumes, SRP's high-priority class is always serviced ahead of low-priority traffic when the ring is congested, so a rising trend here at the expense of the matching low-priority counter is a sign that latency-sensitive traffic is starting to crowd out best-effort traffic on this ring, with unicast traffic being the more direct proxy for ordinary point-to-point application load between specific ring nodes. For instance, this counter might read 527,650 unicast HighPri packets over that window on a moderately busy ring node.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.2.1.8 snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpRingIntUcastHighPriPktsIn
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.2.1.8.1 snmpget -v2c -c public <target> CISCO-SRP-MIB::srpRingIntUcastHighPriPktsIn.1
Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpRingIntUcastHighPriPktsIn OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.60 | ciscosrpMIB | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2 | srpRingCounters | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2.2 | srpRingCountersIntervalTable | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2.2.1 | srpRingCountersIntervalEntry | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2.2.1.8 | srpRingIntUcastHighPriPktsIn | CISCO-SRP-MIB |