CISCO-SRP-MIB :: srpRingIntMcastLowPriPktsIn

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SRP-MIBsrpRingIntMcastLowPriPktsIn

srpRingIntMcastLowPriPktsIn

Module: CISCO-SRP-MIB

OID (symbolic): CISCO-SRP-MIB::srpRingIntMcastLowPriPktsIn

OID (numeric): 1.3.6.1.4.1.9.10.60.2.2.1.6

Node type: OBJECT-TYPE

Type: PerfIntervalCount64

Access: read-only

Description: The counter associated with the number of low priority multicast packets received from the Physical medium dependent layer in a particular 15-minute interval in the past 24 hours.

What is srpRingIntMcastLowPriPktsIn?

This is a 64-bit counter of multicast frames (packet count) arriving off the fiber into this node, specifically the low-priority portion of that traffic, per SRP's two-level QoS scheme, measured over one specific, already-completed 15-minute bucket from the rolling 24-hour history, rather than a live count. Because this is measured on the fiber side, it includes traffic this node is simply relaying past on behalf of other ring nodes, not just traffic this router itself originates or consumes, because SRP always drains high-priority traffic first, a plateau or drop in this low-priority counter while the matching high-priority counter is climbing indicates best-effort traffic is being squeezed out by real-time/control traffic rather than genuinely dropping off, and because multicast frames on a shared ring get passed along until they're stripped off or time out, a sudden multicast surge here more often reflects a flooding condition (e.g. an ARP-like storm or a new multicast subscriber group) than ordinary point-to-point application growth. For instance, this counter might read 518,248 multicast LowPri packets over that window on a moderately busy ring node.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.2.1.6
snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpRingIntMcastLowPriPktsIn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.2.1.6.1
snmpget -v2c -c public <target> CISCO-SRP-MIB::srpRingIntMcastLowPriPktsIn.1

Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpRingIntMcastLowPriPktsIn OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.60ciscosrpMIBCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2srpRingCountersCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2.2srpRingCountersIntervalTableCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2.2.1srpRingCountersIntervalEntryCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2.2.1.6srpRingIntMcastLowPriPktsInCISCO-SRP-MIB