All MIBs › CISCO-SRP-MIB › srpRingIntMcastLowPriOctetsOut
srpRingIntMcastLowPriOctetsOut
Module: CISCO-SRP-MIB
OID (symbolic): CISCO-SRP-MIB::srpRingIntMcastLowPriOctetsOut
OID (numeric): 1.3.6.1.4.1.9.10.60.2.2.1.15
Node type: OBJECT-TYPE
Type: PerfIntervalCount64
Access: read-only
Description: The counter associated with the number of low priority multicast octets going to the Physical medium dependent layer in a particular 15-minute interval in the past 24 hours.
What is srpRingIntMcastLowPriOctetsOut?
This is a 64-bit counter of multicast bytes (octet count) being transmitted from this node onto the fiber, specifically the low-priority portion of that traffic, per SRP's two-level QoS scheme, measured over one specific, already-completed 15-minute bucket from the rolling 24-hour history, rather than a live count. Because this is measured on the fiber side, it includes traffic this node is simply relaying past on behalf of other ring nodes, not just traffic this router itself originates or consumes, because SRP always drains high-priority traffic first, a plateau or drop in this low-priority counter while the matching high-priority counter is climbing indicates best-effort traffic is being squeezed out by real-time/control traffic rather than genuinely dropping off, and because multicast frames on a shared ring get passed along until they're stripped off or time out, a sudden multicast surge here more often reflects a flooding condition (e.g. an ARP-like storm or a new multicast subscriber group) than ordinary point-to-point application growth, and pairing this byte count with the matching packet counter for the same traffic class is how you'd derive the average frame size and the actual bit rate that class is consuming. For instance, this counter might read roughly 544,601,639 bytes of multicast traffic over that window, which combined with the matching packet counter lets you compute an average frame size for that class.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.2.1.15 snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpRingIntMcastLowPriOctetsOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.2.1.15.1 snmpget -v2c -c public <target> CISCO-SRP-MIB::srpRingIntMcastLowPriOctetsOut.1
Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpRingIntMcastLowPriOctetsOut OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.60 | ciscosrpMIB | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2 | srpRingCounters | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2.2 | srpRingCountersIntervalTable | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2.2.1 | srpRingCountersIntervalEntry | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.2.2.1.15 | srpRingIntMcastLowPriOctetsOut | CISCO-SRP-MIB |