CISCO-SRP-MIB :: srpRingCurUcastLowPriPktsOut

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SRP-MIBsrpRingCurUcastLowPriPktsOut

srpRingCurUcastLowPriPktsOut

Module: CISCO-SRP-MIB

OID (symbolic): CISCO-SRP-MIB::srpRingCurUcastLowPriPktsOut

OID (numeric): 1.3.6.1.4.1.9.10.60.2.1.1.10

Node type: OBJECT-TYPE

Type: PerfCurrentCount64

Access: read-only

Description: The counter associated with the number of low priority unicast packets going to the Physical medium dependent layer in the current 15 minute interval.

What is srpRingCurUcastLowPriPktsOut?

This is a 64-bit counter of unicast frames (packet count) being transmitted from this node onto the fiber, specifically the low-priority portion of that traffic, per SRP's two-level QoS scheme, measured over the current, still-accumulating 15-minute window (it resets to zero at the next quarter-hour boundary). Because this is measured on the fiber side, it includes traffic this node is simply relaying past on behalf of other ring nodes, not just traffic this router itself originates or consumes, because SRP always drains high-priority traffic first, a plateau or drop in this low-priority counter while the matching high-priority counter is climbing indicates best-effort traffic is being squeezed out by real-time/control traffic rather than genuinely dropping off, with unicast traffic being the more direct proxy for ordinary point-to-point application load between specific ring nodes. For instance, this counter might read 305,500 unicast LowPri packets over that window on a moderately busy ring node.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.1.1.10
snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpRingCurUcastLowPriPktsOut

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.1.1.10.1
snmpget -v2c -c public <target> CISCO-SRP-MIB::srpRingCurUcastLowPriPktsOut.1

Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpRingCurUcastLowPriPktsOut OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.60ciscosrpMIBCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2srpRingCountersCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2.1srpRingCountersCurrentTableCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2.1.1srpRingCountersCurrentEntryCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2.1.1.10srpRingCurUcastLowPriPktsOutCISCO-SRP-MIB