CISCO-SRP-MIB :: srpRingCurUcastHighPriPktsIn

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SRP-MIBsrpRingCurUcastHighPriPktsIn

srpRingCurUcastHighPriPktsIn

Module: CISCO-SRP-MIB

OID (symbolic): CISCO-SRP-MIB::srpRingCurUcastHighPriPktsIn

OID (numeric): 1.3.6.1.4.1.9.10.60.2.1.1.6

Node type: OBJECT-TYPE

Type: PerfCurrentCount64

Access: read-only

Description: The counter associated with the number of high priority unicast packets received from the Physical medium dependent layer in the current 15 minute interval.

What is srpRingCurUcastHighPriPktsIn?

This is a 64-bit counter of unicast frames (packet count) arriving off the fiber into this node, specifically the high-priority portion of that traffic, per SRP's two-level QoS scheme, measured over the current, still-accumulating 15-minute window (it resets to zero at the next quarter-hour boundary). Because this is measured on the fiber side, it includes traffic this node is simply relaying past on behalf of other ring nodes, not just traffic this router itself originates or consumes, SRP's high-priority class is always serviced ahead of low-priority traffic when the ring is congested, so a rising trend here at the expense of the matching low-priority counter is a sign that latency-sensitive traffic is starting to crowd out best-effort traffic on this ring, with unicast traffic being the more direct proxy for ordinary point-to-point application load between specific ring nodes. For instance, this counter might read 712,026 unicast HighPri packets over that window on a moderately busy ring node.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.1.1.6
snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpRingCurUcastHighPriPktsIn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.2.1.1.6.1
snmpget -v2c -c public <target> CISCO-SRP-MIB::srpRingCurUcastHighPriPktsIn.1

Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpRingCurUcastHighPriPktsIn OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.60ciscosrpMIBCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2srpRingCountersCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2.1srpRingCountersCurrentTableCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2.1.1srpRingCountersCurrentEntryCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.2.1.1.6srpRingCurUcastHighPriPktsInCISCO-SRP-MIB