CISCO-SRP-MIB :: srpRingCurRxErrorsSideBadPackets

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SRP-MIBsrpRingCurRxErrorsSideBadPackets

srpRingCurRxErrorsSideBadPackets

Module: CISCO-SRP-MIB

OID (symbolic): CISCO-SRP-MIB::srpRingCurRxErrorsSideBadPackets

OID (numeric): 1.3.6.1.4.1.9.10.60.4.1.1.5

Node type: OBJECT-TYPE

Type: PerfCurrentCount64

Access: read-only

Description: The counter associated with the current number of bad packets, received from the Physical medium dependent layer in the current 15 minute interval. A bad packet is an empty packet with a valid Start-Of-Packet signal causing an incorrect CRC.

What is srpRingCurRxErrorsSideBadPackets?

This 64-bit counter tallies an SRP-specific framing anomaly seen on frames from the ring fiber: an empty packet carrying a valid Start-Of-Packet signal that still ends up producing an incorrect CRC, over the current, still-running 15-minute window. This is a fairly specific low-level ring-signaling glitch rather than a generic corruption event, so it points more toward an SRP framer/ASIC issue on this or a neighboring ring node than toward ordinary cabling noise. A steady low background rate of a handful of these per interval on an otherwise healthy ring can often be tolerated, but a sudden order-of-magnitude jump would warrant checking the ring's framer hardware on this or an adjacent node.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.4.1.1.5
snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpRingCurRxErrorsSideBadPackets

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.4.1.1.5.1
snmpget -v2c -c public <target> CISCO-SRP-MIB::srpRingCurRxErrorsSideBadPackets.1

Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpRingCurRxErrorsSideBadPackets OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.60ciscosrpMIBCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.4srpErrorsCountersCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.4.1srpErrorsCountersCurrentTableCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.4.1.1srpErrorsCountersCurrentEntryCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.4.1.1.5srpRingCurRxErrorsSideBadPacketsCISCO-SRP-MIB