CISCO-SRP-MIB :: srpHostIntUcastLowPriPktsIn

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SRP-MIBsrpHostIntUcastLowPriPktsIn

srpHostIntUcastLowPriPktsIn

Module: CISCO-SRP-MIB

OID (symbolic): CISCO-SRP-MIB::srpHostIntUcastLowPriPktsIn

OID (numeric): 1.3.6.1.4.1.9.10.60.3.2.1.3

Node type: OBJECT-TYPE

Type: PerfIntervalCount64

Access: read-only

Description: The counter associated with the number of total unicast packets received from the Higher Layer in a particular 15-minute interval in the past 24 hours.

What is srpHostIntUcastLowPriPktsIn?

This is a 64-bit counter of unicast frames (packet count) delivered up from the ring into the router's own higher-layer stack, labeled by its real description simply as the 'total' count rather than explicitly 'low priority' (even though the object's own name says LowPri), measured over one specific, already-completed 15-minute bucket from the rolling 24-hour history, rather than a live count. Because this is measured on the host side, it reflects only traffic this specific router is locally sourcing or sinking, so comparing it against the Ring-side counters on the same box shows how much of what crosses the ring this node actually originates versus just passes through, because SRP always drains high-priority traffic first, a plateau or drop in this low-priority counter while the matching high-priority counter is climbing indicates best-effort traffic is being squeezed out by real-time/control traffic rather than genuinely dropping off, with unicast traffic being the more direct proxy for ordinary point-to-point application load between specific ring nodes. For instance, this counter might read 990,442 unicast LowPri packets over that window on a moderately busy ring node.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.3.2.1.3
snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpHostIntUcastLowPriPktsIn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.3.2.1.3.1
snmpget -v2c -c public <target> CISCO-SRP-MIB::srpHostIntUcastLowPriPktsIn.1

Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpHostIntUcastLowPriPktsIn OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.60ciscosrpMIBCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3srpHostCountersCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.2srpHostCountersIntervalTableCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.2.1srpHostCountersIntervalEntryCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.2.1.3srpHostIntUcastLowPriPktsInCISCO-SRP-MIB