CISCO-SRP-MIB :: srpHostIntUcastHighPriPktsOut

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SRP-MIBsrpHostIntUcastHighPriPktsOut

srpHostIntUcastHighPriPktsOut

Module: CISCO-SRP-MIB

OID (symbolic): CISCO-SRP-MIB::srpHostIntUcastHighPriPktsOut

OID (numeric): 1.3.6.1.4.1.9.10.60.3.2.1.15

Node type: OBJECT-TYPE

Type: PerfIntervalCount64

Access: read-only

Description: The counter associated with the number of high priority unicast packets going to the Higher Layer in a particular 15-minute interval in the past 24 hours.

What is srpHostIntUcastHighPriPktsOut?

This is a 64-bit counter of unicast frames (packet count) injected by the router's own higher-layer stack down onto the ring, specifically the high-priority portion of that traffic, per SRP's two-level QoS scheme, measured over one specific, already-completed 15-minute bucket from the rolling 24-hour history, rather than a live count. Because this is measured on the host side, it reflects only traffic this specific router is locally sourcing or sinking, so comparing it against the Ring-side counters on the same box shows how much of what crosses the ring this node actually originates versus just passes through, SRP's high-priority class is always serviced ahead of low-priority traffic when the ring is congested, so a rising trend here at the expense of the matching low-priority counter is a sign that latency-sensitive traffic is starting to crowd out best-effort traffic on this ring, with unicast traffic being the more direct proxy for ordinary point-to-point application load between specific ring nodes. For instance, this counter might read 958,426 unicast HighPri packets over that window on a moderately busy ring node.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.3.2.1.15
snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpHostIntUcastHighPriPktsOut

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.3.2.1.15.1
snmpget -v2c -c public <target> CISCO-SRP-MIB::srpHostIntUcastHighPriPktsOut.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> srpHostIntUcastHighPriPktsOut.1

Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpHostIntUcastHighPriPktsOut OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.60ciscosrpMIBCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3srpHostCountersCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.2srpHostCountersIntervalTableCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.2.1srpHostCountersIntervalEntryCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.2.1.15srpHostIntUcastHighPriPktsOutCISCO-SRP-MIB