CISCO-SRP-MIB :: srpHostIntMcastLowPriPktsOut

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SRP-MIBsrpHostIntMcastLowPriPktsOut

srpHostIntMcastLowPriPktsOut

Module: CISCO-SRP-MIB

OID (symbolic): CISCO-SRP-MIB::srpHostIntMcastLowPriPktsOut

OID (numeric): 1.3.6.1.4.1.9.10.60.3.2.1.13

Node type: OBJECT-TYPE

Type: PerfIntervalCount64

Access: read-only

Description: The counter associated with the number of total multicast packets going to the Higher Layer in a particular 15-minute interval in the past 24 hours.

What is srpHostIntMcastLowPriPktsOut?

This is a 64-bit counter of multicast frames (packet count) injected by the router's own higher-layer stack down onto the ring, labeled by its real description simply as the 'total' count rather than explicitly 'low priority' (even though the object's own name says LowPri), measured over one specific, already-completed 15-minute bucket from the rolling 24-hour history, rather than a live count. Because this is measured on the host side, it reflects only traffic this specific router is locally sourcing or sinking, so comparing it against the Ring-side counters on the same box shows how much of what crosses the ring this node actually originates versus just passes through, because SRP always drains high-priority traffic first, a plateau or drop in this low-priority counter while the matching high-priority counter is climbing indicates best-effort traffic is being squeezed out by real-time/control traffic rather than genuinely dropping off, and because multicast frames on a shared ring get passed along until they're stripped off or time out, a sudden multicast surge here more often reflects a flooding condition (e.g. an ARP-like storm or a new multicast subscriber group) than ordinary point-to-point application growth. For instance, this counter might read 513,724 multicast LowPri packets over that window on a moderately busy ring node.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.3.2.1.13
snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpHostIntMcastLowPriPktsOut

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.3.2.1.13.1
snmpget -v2c -c public <target> CISCO-SRP-MIB::srpHostIntMcastLowPriPktsOut.1

Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpHostIntMcastLowPriPktsOut OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.60ciscosrpMIBCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3srpHostCountersCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.2srpHostCountersIntervalTableCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.2.1srpHostCountersIntervalEntryCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.2.1.13srpHostIntMcastLowPriPktsOutCISCO-SRP-MIB