CISCO-SRP-MIB :: srpHostCurMcastLowPriPktsIn

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SRP-MIBsrpHostCurMcastLowPriPktsIn

srpHostCurMcastLowPriPktsIn

Module: CISCO-SRP-MIB

OID (symbolic): CISCO-SRP-MIB::srpHostCurMcastLowPriPktsIn

OID (numeric): 1.3.6.1.4.1.9.10.60.3.1.1.4

Node type: OBJECT-TYPE

Type: PerfCurrentCount64

Access: read-only

Description: The counter associated with the number of total multicast packets received from the Higher Layer in the current 15 minute interval.

What is srpHostCurMcastLowPriPktsIn?

This is a 64-bit counter of multicast frames (packet count) delivered up from the ring into the router's own higher-layer stack, labeled by its real description simply as the 'total' count rather than explicitly 'low priority' (even though the object's own name says LowPri), measured over the current, still-accumulating 15-minute window (it resets to zero at the next quarter-hour boundary). Because this is measured on the host side, it reflects only traffic this specific router is locally sourcing or sinking, so comparing it against the Ring-side counters on the same box shows how much of what crosses the ring this node actually originates versus just passes through, because SRP always drains high-priority traffic first, a plateau or drop in this low-priority counter while the matching high-priority counter is climbing indicates best-effort traffic is being squeezed out by real-time/control traffic rather than genuinely dropping off, and because multicast frames on a shared ring get passed along until they're stripped off or time out, a sudden multicast surge here more often reflects a flooding condition (e.g. an ARP-like storm or a new multicast subscriber group) than ordinary point-to-point application growth. For instance, this counter might read 725,187 multicast LowPri packets over that window on a moderately busy ring node.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.3.1.1.4
snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpHostCurMcastLowPriPktsIn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.3.1.1.4.1
snmpget -v2c -c public <target> CISCO-SRP-MIB::srpHostCurMcastLowPriPktsIn.1

Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpHostCurMcastLowPriPktsIn OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.60ciscosrpMIBCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3srpHostCountersCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.1srpHostCountersCurrentTableCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.1.1srpHostCountersCurrentEntryCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.3.1.1.4srpHostCurMcastLowPriPktsInCISCO-SRP-MIB