All MIBs › CISCO-SRP-MIB › srpHostCurMcastHighPriPktsOut
srpHostCurMcastHighPriPktsOut
Module: CISCO-SRP-MIB
OID (symbolic): CISCO-SRP-MIB::srpHostCurMcastHighPriPktsOut
OID (numeric): 1.3.6.1.4.1.9.10.60.3.1.1.16
Node type: OBJECT-TYPE
Type: PerfCurrentCount64
Access: read-only
Description: The counter associated with the number of high priority multicast packets going to the Higher Layer in the current 15 minute interval.
What is srpHostCurMcastHighPriPktsOut?
This is a 64-bit counter of multicast frames (packet count) injected by the router's own higher-layer stack down onto the ring, specifically the high-priority portion of that traffic, per SRP's two-level QoS scheme, measured over the current, still-accumulating 15-minute window (it resets to zero at the next quarter-hour boundary). Because this is measured on the host side, it reflects only traffic this specific router is locally sourcing or sinking, so comparing it against the Ring-side counters on the same box shows how much of what crosses the ring this node actually originates versus just passes through, SRP's high-priority class is always serviced ahead of low-priority traffic when the ring is congested, so a rising trend here at the expense of the matching low-priority counter is a sign that latency-sensitive traffic is starting to crowd out best-effort traffic on this ring, and because multicast frames on a shared ring get passed along until they're stripped off or time out, a sudden multicast surge here more often reflects a flooding condition (e.g. an ARP-like storm or a new multicast subscriber group) than ordinary point-to-point application growth. For instance, this counter might read 442,301 multicast HighPri packets over that window on a moderately busy ring node.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.3.1.1.16 snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpHostCurMcastHighPriPktsOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.3.1.1.16.1 snmpget -v2c -c public <target> CISCO-SRP-MIB::srpHostCurMcastHighPriPktsOut.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> srpHostCurMcastHighPriPktsOut.1
Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpHostCurMcastHighPriPktsOut OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.60 | ciscosrpMIB | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.3 | srpHostCounters | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.3.1 | srpHostCountersCurrentTable | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.3.1.1 | srpHostCountersCurrentEntry | CISCO-SRP-MIB |
| 1.3.6.1.4.1.9.10.60.3.1.1.16 | srpHostCurMcastHighPriPktsOut | CISCO-SRP-MIB |