CISCO-SRP-MIB :: srpErrCntIntRingRxAbortPkts

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SRP-MIBsrpErrCntIntRingRxAbortPkts

srpErrCntIntRingRxAbortPkts

Module: CISCO-SRP-MIB

OID (symbolic): CISCO-SRP-MIB::srpErrCntIntRingRxAbortPkts

OID (numeric): 1.3.6.1.4.1.9.10.60.4.4.1.6

Node type: OBJECT-TYPE

Type: PerfIntervalCount64

Access: read-only

Description: The counter associated with the interval number of aborted packets, received from the Layer 1 Physical medium in a particular 15-minute interval in the past 24 hours.

What is srpErrCntIntRingRxAbortPkts?

This 64-bit counter tallies aborted packets — frames that were deliberately truncated mid-transmission using an abort sequence code, counted over one specific completed 15-minute bucket from the rolling 24-hour history. Because the sending node itself signals the abort rather than the frame simply being corrupted in transit, a rise in this counter often correlates with ring protection-switching events (tracked separately by srpRingIntWrapCounter), since a wrap event mid-transmission is a common trigger for a sender to abort a frame in flight. A burst of aborted packets landing in the same 15-minute interval as an increment in srpRingIntWrapCounter would confirm the aborts were triggered by that specific ring wrap event.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.60.4.4.1.6
snmpwalk -v2c -c public <target> CISCO-SRP-MIB::srpErrCntIntRingRxAbortPkts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.60.4.4.1.6.1
snmpget -v2c -c public <target> CISCO-SRP-MIB::srpErrCntIntRingRxAbortPkts.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> srpErrCntIntRingRxAbortPkts.1

Start monitoring Cisco DPT/SRP ring interface routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SRP-MIB::srpErrCntIntRingRxAbortPkts OID value, configure state conditions and alerts, and monitor any Cisco DPT/SRP ring interface routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.60ciscosrpMIBCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.4srpErrorsCountersCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.4.4srpErrCntIntTableCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.4.4.1srpErrCntIntEntryCISCO-SRP-MIB
1.3.6.1.4.1.9.10.60.4.4.1.6srpErrCntIntRingRxAbortPktsCISCO-SRP-MIB