CISCO-SONET-MIB :: cspSonetPathPayload

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SONET-MIBcspSonetPathPayload

cspSonetPathPayload

Module: CISCO-SONET-MIB

OID (symbolic): CISCO-SONET-MIB::cspSonetPathPayload

OID (numeric): 1.3.6.1.4.1.9.9.126.1.7.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the payload carried by the SONET/SDH Path. The payload specification corresponds to C2 (Signal Label) overhead byte in SONET/SDH Path Overhead: unequipped(1) : Path is not provisioned to carry any payload. unspecified(2) : Path is carrying an unspecifed payload. ds3(3) : Path is carrying a DS3 path as payload. vt15vc11(4) : Path is carrying SONET-VT1.5/SDH-VC11 payload. vt2vc12(5) : Path is carrying SONET-VT2/SDH-VC12 as payload. atmCell(6) : Path is carrying ATM Cells as payload. hdlcFr(7) : Path is carrying Frame Relay (HDLC) payload. e3(8) : Path is carrying an E3 path as payload. vtStructured(9) : Path is carrying VTGs/TUG3s/TUG2s which may each carry a different payload. A write operation on this object will result in update to C2 overhead byte in the Path Overhead.

What is cspSonetPathPayload?

A read-write setting specifying what payload type the SONET/SDH Path carries (e.g., unequipped or unspecified), corresponding to the C2 Signal Label overhead byte in the Path Overhead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.126.1.7.1.1.1
snmpwalk -v2c -c public <target> CISCO-SONET-MIB::cspSonetPathPayload

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.126.1.7.1.1.1.1
snmpget -v2c -c public <target> CISCO-SONET-MIB::cspSonetPathPayload.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.126.1.7.1.1.1.1 i <value>

Start monitoring Cisco SONET/SDH transport routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SONET-MIB::cspSonetPathPayload OID value, configure state conditions and alerts, and monitor any Cisco SONET/SDH transport routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.126ciscoSonetMIBCISCO-SONET-MIB
1.3.6.1.4.1.9.9.126.1ciscoSonetMIBObjectsCISCO-SONET-MIB
1.3.6.1.4.1.9.9.126.1.7cspConfigCISCO-SONET-MIB
1.3.6.1.4.1.9.9.126.1.7.1cspConfigTableCISCO-SONET-MIB
1.3.6.1.4.1.9.9.126.1.7.1.1cspConfigEntryCISCO-SONET-MIB
1.3.6.1.4.1.9.9.126.1.7.1.1.1cspSonetPathPayloadCISCO-SONET-MIB