All MIBs › CISCO-SNA-LLC-MIB › llcSapAdminMaxUnackedIPDUsSend
llcSapAdminMaxUnackedIPDUsSend
Module: CISCO-SNA-LLC-MIB
OID (symbolic): CISCO-SNA-LLC-MIB::llcSapAdminMaxUnackedIPDUsSend
OID (numeric): 1.3.6.1.4.1.9.10.8.1.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object denotes the default maximum consecutive unacknowledged I PDU frames that LLCs on this SAP may send to their remote LLC partners. This count is referred to as 'k' in the IEEE 802.2 specification [5].
A zero value for this object indicates that the port default, llcPortAdminMaxUnackedIPDUsSend, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminMaxUnackedIPDUsSend object.
At connection setup, the remote LLC may send, using an XID frame, the maximum number of unacknowledged I PDUs which it is prepared to receive. If so, an implementation may choose to override the administered maximum number of unacknowledged PDUs with the dynamically learned value and should reflect this in the llcCcOperMaxUnackedIPDUsSend object for the connection component.
What is llcSapAdminMaxUnackedIPDUsSend?
Read-write setting specifying the default maximum number of consecutive unacknowledged I PDUs this SAP's LLCs may send before requiring acknowledgment (the 'k' parameter in IEEE 802.2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.8.1.2.1.1.3 snmpwalk -v2c -c public <target> CISCO-SNA-LLC-MIB::llcSapAdminMaxUnackedIPDUsSend
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.8.1.2.1.1.3.1 snmpget -v2c -c public <target> CISCO-SNA-LLC-MIB::llcSapAdminMaxUnackedIPDUsSend.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.8.1.2.1.1.3.1 i <value>
Start monitoring Cisco router (SNA/DLSw gateway, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SNA-LLC-MIB::llcSapAdminMaxUnackedIPDUsSend OID value, configure state conditions and alerts, and monitor any Cisco router (SNA/DLSw gateway, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.8 | ciscoSnaLlcMIB | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1 | ciscoSnaLlcMIBObjects | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.2 | llcSapGroup | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.2.1 | llcSapAdminTable | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.2.1.1 | llcSapAdminEntry | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.2.1.1.3 | llcSapAdminMaxUnackedIPDUsSend | CISCO-SNA-LLC-MIB |