All MIBs › CISCO-SNA-LLC-MIB › llcSapAdminMaxPDUOctets
llcSapAdminMaxPDUOctets
Module: CISCO-SNA-LLC-MIB
OID (symbolic): CISCO-SNA-LLC-MIB::llcSapAdminMaxPDUOctets
OID (numeric): 1.3.6.1.4.1.9.10.8.1.2.1.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object denotes the default maximum I PDU size, in octets, that LLCs on this SAP may send to their remote connection component partners. This count is referred to as 'N1' in the IEEE 802.2 specification [5].
A zero value for this object indicates that the port default, llcPortAdminMaxIPDUOctetsSend, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminMaxIPDUOctetsSend object.
At connection setup, the remote LLC may send, using an XID frame, the maximum I PDU size which it is prepared to receive. If so, an implementation may choose to override the administered maximum PDU size with the dynamically learned value and should reflect this in the llcCcOperMaxIPDUOctetsSend object for the connection component.
The I PDU size includes all octets in a frame, excluding framing characters, the MAC header and link header.
What is llcSapAdminMaxPDUOctets?
Read-write setting defining the default maximum size, in octets, of I-format PDUs that LLCs on this SAP may send to remote partners (the 'N1' parameter in IEEE 802.2); a value of zero means no explicit limit is configured.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.8.1.2.1.1.2 snmpwalk -v2c -c public <target> CISCO-SNA-LLC-MIB::llcSapAdminMaxPDUOctets
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.8.1.2.1.1.2.1 snmpget -v2c -c public <target> CISCO-SNA-LLC-MIB::llcSapAdminMaxPDUOctets.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.8.1.2.1.1.2.1 i <value>
Start monitoring Cisco router (SNA/DLSw gateway, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SNA-LLC-MIB::llcSapAdminMaxPDUOctets OID value, configure state conditions and alerts, and monitor any Cisco router (SNA/DLSw gateway, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.8 | ciscoSnaLlcMIB | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1 | ciscoSnaLlcMIBObjects | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.2 | llcSapGroup | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.2.1 | llcSapAdminTable | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.2.1.1 | llcSapAdminEntry | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.2.1.1.2 | llcSapAdminMaxPDUOctets | CISCO-SNA-LLC-MIB |