CISCO-SNA-LLC-MIB :: llcSapAdminDelayAckCount

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SNA-LLC-MIBllcSapAdminDelayAckCount

llcSapAdminDelayAckCount

Module: CISCO-SNA-LLC-MIB

OID (symbolic): CISCO-SNA-LLC-MIB::llcSapAdminDelayAckCount

OID (numeric): 1.3.6.1.4.1.9.10.8.1.2.1.1.11

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object denotes the default value for the maximum number of consecutive I PDUs which the LLCs on this SAP shall receive during the interval defined by llcCcOperDelayTimer without sending an immediate acknowledgement. This must be less than or equal to the value of llcCcOperMaxUnackIPDURcv. This function is not described in the IEEE 802.2 specification [5] but is widely implemented.

A zero value for this object indicates that the port default, llcPortAdminDelayAck, shall be used as the SAP default. This SAP default value may be overridden by a non-zero value in the llcCcAdminDelayAckCount.

A value of one indicates that acknowledgments will be sent immediately and that the value of llcSapAdminDelayAckTimer shall be ignored.

What is llcSapAdminDelayAckCount?

Read-write setting for the default maximum number of consecutive I PDUs this SAP's LLCs may receive within the delay-ack timer window before an acknowledgement must be sent immediately.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.8.1.2.1.1.11
snmpwalk -v2c -c public <target> CISCO-SNA-LLC-MIB::llcSapAdminDelayAckCount

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.8.1.2.1.1.11.1
snmpget -v2c -c public <target> CISCO-SNA-LLC-MIB::llcSapAdminDelayAckCount.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.8.1.2.1.1.11.1 i <value>

Start monitoring Cisco router (SNA/DLSw gateway, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SNA-LLC-MIB::llcSapAdminDelayAckCount OID value, configure state conditions and alerts, and monitor any Cisco router (SNA/DLSw gateway, legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.8ciscoSnaLlcMIBCISCO-SNA-LLC-MIB
1.3.6.1.4.1.9.10.8.1ciscoSnaLlcMIBObjectsCISCO-SNA-LLC-MIB
1.3.6.1.4.1.9.10.8.1.2llcSapGroupCISCO-SNA-LLC-MIB
1.3.6.1.4.1.9.10.8.1.2.1llcSapAdminTableCISCO-SNA-LLC-MIB
1.3.6.1.4.1.9.10.8.1.2.1.1llcSapAdminEntryCISCO-SNA-LLC-MIB
1.3.6.1.4.1.9.10.8.1.2.1.1.11llcSapAdminDelayAckCountCISCO-SNA-LLC-MIB