CISCO-SNA-LLC-MIB :: llcPortAdminMaxUnackedIPDUsSend

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SNA-LLC-MIBllcPortAdminMaxUnackedIPDUsSend

llcPortAdminMaxUnackedIPDUsSend

Module: CISCO-SNA-LLC-MIB

OID (symbolic): CISCO-SNA-LLC-MIB::llcPortAdminMaxUnackedIPDUsSend

OID (numeric): 1.3.6.1.4.1.9.10.8.1.1.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object denotes the default maximum consecutive unacknowledged I PDU frames that LLCs on this port may send to their remote LLC partners. This count is referred to as 'k' in the IEEE 802.2 specification [5].

This port default value may be overridden by a non-zero SAP default value in the llcSapAdminMaxUnackedIPDUsSend object or by a non-zero value in the llcCcAdminMaxUnackedIPDUsSend object.

At connection setup, the remote LLC may send, using an XID frame, the maximum number of unacknowledged I PDUs which it is prepared to receive. If so, an implementation may choose to override the administered maximum number of unacknowledged PDUs with the dynamically learned value and should reflect this in the llcCcOperMaxUnackedIPDUsSend object for the connection component.

What is llcPortAdminMaxUnackedIPDUsSend?

Sets the default maximum number of consecutive unacknowledged I-PDU frames (the IEEE 802.2 'k' parameter) that LLCs on this port may send before requiring acknowledgement.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.8.1.1.1.1.6
snmpwalk -v2c -c public <target> CISCO-SNA-LLC-MIB::llcPortAdminMaxUnackedIPDUsSend

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.8.1.1.1.1.6.1
snmpget -v2c -c public <target> CISCO-SNA-LLC-MIB::llcPortAdminMaxUnackedIPDUsSend.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.8.1.1.1.1.6.1 i <value>

Start monitoring Cisco router (SNA/DLSw gateway, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SNA-LLC-MIB::llcPortAdminMaxUnackedIPDUsSend OID value, configure state conditions and alerts, and monitor any Cisco router (SNA/DLSw gateway, legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.8ciscoSnaLlcMIBCISCO-SNA-LLC-MIB
1.3.6.1.4.1.9.10.8.1ciscoSnaLlcMIBObjectsCISCO-SNA-LLC-MIB
1.3.6.1.4.1.9.10.8.1.1llcPortGroupCISCO-SNA-LLC-MIB
1.3.6.1.4.1.9.10.8.1.1.1llcPortAdminTableCISCO-SNA-LLC-MIB
1.3.6.1.4.1.9.10.8.1.1.1.1llcPortAdminEntryCISCO-SNA-LLC-MIB
1.3.6.1.4.1.9.10.8.1.1.1.1.6llcPortAdminMaxUnackedIPDUsSendCISCO-SNA-LLC-MIB