All MIBs › CISCO-SNA-LLC-MIB › llcPortAdminDelayAckCount
llcPortAdminDelayAckCount
Module: CISCO-SNA-LLC-MIB
OID (symbolic): CISCO-SNA-LLC-MIB::llcPortAdminDelayAckCount
OID (numeric): 1.3.6.1.4.1.9.10.8.1.1.1.1.14
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object denotes the default value for the maximum number of consecutive I PDUs which the LLCs on this port shall receive during the interval defined by llcCcOperDelayTimertime without sending an immediate acknowledgement. This must be less than or equal to the value of llcCcOperMaxUnackIPDURcv. This function is not described in the IEEE 802.2 specification [5]. It is listed in the IBM Token-Ring Network Architecture Reference [6] as the N3 parameter and is widely implemented.
This port default value may be overridden by a non-zero SAP default value in the llcSapAdminDelayAckCount object or by a non-zero value in the llcCcAdminDelayCount object.
A value of one indicates that acknowledgments will be sent immediately and that the value of llcPortAdminDelayAckTimer shall be ignored.
What is llcPortAdminDelayAckCount?
Sets the default maximum number of consecutive I-PDUs an LLC on this port may receive within the delay-ack timer interval before it must send an immediate acknowledgement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.8.1.1.1.1.14 snmpwalk -v2c -c public <target> CISCO-SNA-LLC-MIB::llcPortAdminDelayAckCount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.8.1.1.1.1.14.1 snmpget -v2c -c public <target> CISCO-SNA-LLC-MIB::llcPortAdminDelayAckCount.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.8.1.1.1.1.14.1 i <value>
Start monitoring Cisco router (SNA/DLSw gateway, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SNA-LLC-MIB::llcPortAdminDelayAckCount OID value, configure state conditions and alerts, and monitor any Cisco router (SNA/DLSw gateway, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.8 | ciscoSnaLlcMIB | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1 | ciscoSnaLlcMIBObjects | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.1 | llcPortGroup | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.1.1 | llcPortAdminTable | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.1.1.1 | llcPortAdminEntry | CISCO-SNA-LLC-MIB |
| 1.3.6.1.4.1.9.10.8.1.1.1.1.14 | llcPortAdminDelayAckCount | CISCO-SNA-LLC-MIB |