CISCO-SERVICE-CONTROLLER-MIB :: cscAggregativeGlobalControllersCommittedInformationRate

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-SERVICE-CONTROLLER-MIB › cscAggregativeGlobalControllersCommittedInformationRate

cscAggregativeGlobalControllersCommittedInformationRate

Module: CISCO-SERVICE-CONTROLLER-MIB

OID (symbolic): CISCO-SERVICE-CONTROLLER-MIB::cscAggregativeGlobalControllersCommittedInformationRate

OID (numeric): 1.3.6.1.4.1.9.9.667.0.3.1.5

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-write

Description: This object specifies the committed information rate which is the aggregate rate that the bandwidth controller is committed to supply to its controlled flows. In all cases, the system will do its utmost to ensure that committed rate is not harmed. This cannot be guaranteed in cases of oversubscription of committed rate in the system as a whole.

What is cscAggregativeGlobalControllersCommittedInformationRate?

Sets the committed information rate (CIR), the guaranteed aggregate bandwidth the controller strives to always supply to its controlled flows even under congestion.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.667.0.3.1.5
snmpwalk -v2c -c public <target> CISCO-SERVICE-CONTROLLER-MIB::cscAggregativeGlobalControllersCommittedInformationRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.667.0.3.1.5.1
snmpget -v2c -c public <target> CISCO-SERVICE-CONTROLLER-MIB::cscAggregativeGlobalControllersCommittedInformationRate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.667.0.3.1.5.1 i <value>

Start monitoring Cisco Service Control Engine (SCE) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SERVICE-CONTROLLER-MIB::cscAggregativeGlobalControllersCommittedInformationRate OID value, configure state conditions and alerts, and monitor any Cisco Service Control Engine (SCE) platforms from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.667ciscoServiceControllerMIBCISCO-SERVICE-CONTROLLER-MIB
1.3.6.1.4.1.9.9.667.0ciscoServiceControlMIBObjectsCISCO-SERVICE-CONTROLLER-MIB
1.3.6.1.4.1.9.9.667.0.3cscAggregativeGlobalControllersLinkTableCISCO-SERVICE-CONTROLLER-MIB
1.3.6.1.4.1.9.9.667.0.3.1cscAggregativeGlobalControllersLinkEntryCISCO-SERVICE-CONTROLLER-MIB
1.3.6.1.4.1.9.9.667.0.3.1.5cscAggregativeGlobalControllersCommittedInformationRateCISCO-SERVICE-CONTROLLER-MIB