CISCO-SERVICE-CONTROLLER-MIB :: cscAggregativeGlobalControllersAssuranceLevel

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-SERVICE-CONTROLLER-MIB › cscAggregativeGlobalControllersAssuranceLevel

cscAggregativeGlobalControllersAssuranceLevel

Module: CISCO-SERVICE-CONTROLLER-MIB

OID (symbolic): CISCO-SERVICE-CONTROLLER-MIB::cscAggregativeGlobalControllersAssuranceLevel

OID (numeric): 1.3.6.1.4.1.9.9.667.0.3.1.7

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies assurance level which is the bandwidth controller strength in the competition over bandwidth in case of congestion. Assured level controls how fast Enforced rate would decrease from peak information rate to committed information rate as congestion builds, or increase from committed information rate to peak information rate as congestion decreases. A higher assured level ensures a higher enforced rate compared to a similar bandwidth controller with a lower assured level.

What is cscAggregativeGlobalControllersAssuranceLevel?

Sets the assurance level that determines how strongly this bandwidth controller competes for bandwidth during congestion, controlling how quickly its enforced rate decays from peak to committed rate.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.667.0.3.1.7
snmpwalk -v2c -c public <target> CISCO-SERVICE-CONTROLLER-MIB::cscAggregativeGlobalControllersAssuranceLevel

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.667.0.3.1.7.1
snmpget -v2c -c public <target> CISCO-SERVICE-CONTROLLER-MIB::cscAggregativeGlobalControllersAssuranceLevel.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.667.0.3.1.7.1 i <value>

Start monitoring Cisco Service Control Engine (SCE) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SERVICE-CONTROLLER-MIB::cscAggregativeGlobalControllersAssuranceLevel OID value, configure state conditions and alerts, and monitor any Cisco Service Control Engine (SCE) platforms from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.667ciscoServiceControllerMIBCISCO-SERVICE-CONTROLLER-MIB
1.3.6.1.4.1.9.9.667.0ciscoServiceControlMIBObjectsCISCO-SERVICE-CONTROLLER-MIB
1.3.6.1.4.1.9.9.667.0.3cscAggregativeGlobalControllersLinkTableCISCO-SERVICE-CONTROLLER-MIB
1.3.6.1.4.1.9.9.667.0.3.1cscAggregativeGlobalControllersLinkEntryCISCO-SERVICE-CONTROLLER-MIB
1.3.6.1.4.1.9.9.667.0.3.1.7cscAggregativeGlobalControllersAssuranceLevelCISCO-SERVICE-CONTROLLER-MIB