CISCO-SERVICE-CONTROL-RDR-MIB :: cscRdrFormatterForwardingMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-SERVICE-CONTROL-RDR-MIB › cscRdrFormatterForwardingMode

cscRdrFormatterForwardingMode

Module: CISCO-SERVICE-CONTROL-RDR-MIB

OID (symbolic): CISCO-SERVICE-CONTROL-RDR-MIB::cscRdrFormatterForwardingMode

OID (numeric): 1.3.6.1.4.1.9.9.637.1.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the mode by which the RDR formatter sends the reports to its destinations. 'other' : The RDR formatter is using a protocol not recognized by this revision of the MIB. 'redundancy' : The reports are sent to the primary (active destination) and all of the other destinations are in standby. 'simpleLoadBalancing' : The reports are sent to one destination at a time in a round robin manner. 'multicast' : The reports are sent to all of the destinations.

What is cscRdrFormatterForwardingMode?

Indicates and lets you configure how the RDR formatter forwards reports to its configured destinations (e.g. redundant vs. other delivery modes).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.637.1.1.1.8
snmpwalk -v2c -c public <target> CISCO-SERVICE-CONTROL-RDR-MIB::cscRdrFormatterForwardingMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.637.1.1.1.8.1
snmpget -v2c -c public <target> CISCO-SERVICE-CONTROL-RDR-MIB::cscRdrFormatterForwardingMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.637.1.1.1.8.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cscRdrFormatterForwardingMode.1

Start monitoring Cisco Service Control Engine (SCE) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SERVICE-CONTROL-RDR-MIB::cscRdrFormatterForwardingMode OID value, configure state conditions and alerts, and monitor any Cisco Service Control Engine (SCE) platforms from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.637ciscoServiceControlRdrMIBCISCO-SERVICE-CONTROL-RDR-MIB
1.3.6.1.4.1.9.9.637.1ciscoSCRdrMIBObjectsCISCO-SERVICE-CONTROL-RDR-MIB
1.3.6.1.4.1.9.9.637.1.1cscRdrFormatterTableCISCO-SERVICE-CONTROL-RDR-MIB
1.3.6.1.4.1.9.9.637.1.1.1cscRdrFormatterEntryCISCO-SERVICE-CONTROL-RDR-MIB
1.3.6.1.4.1.9.9.637.1.1.1.8cscRdrFormatterForwardingModeCISCO-SERVICE-CONTROL-RDR-MIB