CISCO-SCTP-MIB :: ceSctpAssocLocalAddressRowStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SCTP-MIBceSctpAssocLocalAddressRowStatus

ceSctpAssocLocalAddressRowStatus

Module: CISCO-SCTP-MIB

OID (symbolic): CISCO-SCTP-MIB::ceSctpAssocLocalAddressRowStatus

OID (numeric): 1.3.6.1.4.1.9.10.74.1.2.2.1.3

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-only

Description: An object that allows entries in this table to be created and deleted using the RowStatus convention. A row in this table will be created per local IP address defined for this association. The creation takes part when a new row in the sctpAssocTable is created or when a new IP address is added in the local interface (if this function is enabled by the SCTP layer). A row in this table will be deleted per local IP address reserved for the association when the corresponding row in sctpAssocTable is deleted or when an IP address is removed from the local interface (if this function is enabled by the SCTP layer).

What is ceSctpAssocLocalAddressRowStatus?

This object is the RowStatus for a row representing one local IP address bound to this specific association, created per local address at setup or when a new local interface address is added. On a multihomed signaling device, each such row represents one of potentially several local paths to a given peer, so an admin checking why only some local addresses are being used for that association should look here to confirm all expected rows actually exist. An association expected to be multihomed over two local interfaces but showing only one row in this table indicates the second local address never got properly registered for that specific association.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.74.1.2.2.1.3
snmpwalk -v2c -c public <target> CISCO-SCTP-MIB::ceSctpAssocLocalAddressRowStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.74.1.2.2.1.3.1
snmpget -v2c -c public <target> CISCO-SCTP-MIB::ceSctpAssocLocalAddressRowStatus.1

Start monitoring Cisco router/media gateway with SCTP signaling support with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SCTP-MIB::ceSctpAssocLocalAddressRowStatus OID value, configure state conditions and alerts, and monitor any Cisco router/media gateway with SCTP signaling support from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.74ceSctpMIBCISCO-SCTP-MIB
1.3.6.1.4.1.9.10.74.1ceSctpObjectsCISCO-SCTP-MIB
1.3.6.1.4.1.9.10.74.1.2ceSctpTablesCISCO-SCTP-MIB
1.3.6.1.4.1.9.10.74.1.2.2ceSctpAssocLocalAddressTableCISCO-SCTP-MIB
1.3.6.1.4.1.9.10.74.1.2.2.1ceSctpAssocLocalAddressEntryCISCO-SCTP-MIB
1.3.6.1.4.1.9.10.74.1.2.2.1.3ceSctpAssocLocalAddressRowStatusCISCO-SCTP-MIB