CISCO-RF-SUPPLEMENTAL-MIB :: cRfSupSysStartupConfigAdmin

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-RF-SUPPLEMENTAL-MIB › cRfSupSysStartupConfigAdmin

cRfSupSysStartupConfigAdmin

Module: CISCO-RF-SUPPLEMENTAL-MIB

OID (symbolic): CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysStartupConfigAdmin

OID (numeric): 1.3.6.1.4.1.9.9.198.1.1.8

Node type: OBJECT-TYPE

Type: RfSupSyncAdminState

Access: read-write

Description: Enables/Disables automatic startup configuration syncs only. Doesn't affect other types of sync activity. If set to the default value enableAutoSync, the Active unit will send the full current startup configuration to the Standby unit(s) after any operation that changes the startup configuration in non-volatile memory.

This object is not applicable to systems where running configuration is always stored in non-volatile memory.

Setting disableAutoSync may be useful for some maintenance and debugging operations.

What is cRfSupSysStartupConfigAdmin?

A read-write setting that enables or disables automatic synchronization of the startup configuration from the active unit to the standby unit(s) whenever the startup config changes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.198.1.1.8
snmpwalk -v2c -c public <target> CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysStartupConfigAdmin

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.198.1.1.8.1
snmpget -v2c -c public <target> CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysStartupConfigAdmin.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.198.1.1.8.1 s <value>

Start monitoring Cisco router/Catalyst switch with redundant supervisors/RP with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysStartupConfigAdmin OID value, configure state conditions and alerts, and monitor any Cisco router/Catalyst switch with redundant supervisors/RP from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.198ciscoRfSupMIBCISCO-RF-SUPPLEMENTAL-MIB
1.3.6.1.4.1.9.9.198.1ciscoRfSupMIBObjectsCISCO-RF-SUPPLEMENTAL-MIB
1.3.6.1.4.1.9.9.198.1.1cRfSupSystemCISCO-RF-SUPPLEMENTAL-MIB
1.3.6.1.4.1.9.9.198.1.1.8cRfSupSysStartupConfigAdminCISCO-RF-SUPPLEMENTAL-MIB