CISCO-RF-SUPPLEMENTAL-MIB :: cRfSupSysBootImageSyncTime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-RF-SUPPLEMENTAL-MIB › cRfSupSysBootImageSyncTime

cRfSupSysBootImageSyncTime

Module: CISCO-RF-SUPPLEMENTAL-MIB

OID (symbolic): CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysBootImageSyncTime

OID (numeric): 1.3.6.1.4.1.9.9.198.1.1.10

Node type: OBJECT-TYPE

Type: DateAndTime

Access: read-only

Description: The date and time when the boot image memory was last successfully synced from the current Active unit to the Standby unit(s).

This object will remain uninstantiated if no sync has yet taken place since the current Active CPU was initialized or if a Standby unit was forced to take over before the initial database sync was completed.

Since automatic boot image memory syncs are event driven and may be disabled by configuration, this time doesn't directly reflect whether Standby boot image memory is in sync with the Active unit.

Instead, see the cRfSupSysBootImageOper object to determine whether Standby boot image memory is in sync with the Active unit.

What is cRfSupSysBootImageSyncTime?

Reports the date and time the boot image memory was last successfully synced from the Active unit to the Standby unit(s); remains uninstantiated if no sync has occurred since the Active CPU initialized.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.198.1.1.10
snmpwalk -v2c -c public <target> CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysBootImageSyncTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.198.1.1.10.1
snmpget -v2c -c public <target> CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysBootImageSyncTime.1

Start monitoring Cisco router/Catalyst switch with redundant supervisors/RP with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysBootImageSyncTime OID value, configure state conditions and alerts, and monitor any Cisco router/Catalyst switch with redundant supervisors/RP from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.198ciscoRfSupMIBCISCO-RF-SUPPLEMENTAL-MIB
1.3.6.1.4.1.9.9.198.1ciscoRfSupMIBObjectsCISCO-RF-SUPPLEMENTAL-MIB
1.3.6.1.4.1.9.9.198.1.1cRfSupSystemCISCO-RF-SUPPLEMENTAL-MIB
1.3.6.1.4.1.9.9.198.1.1.10cRfSupSysBootImageSyncTimeCISCO-RF-SUPPLEMENTAL-MIB