CISCO-RF-SUPPLEMENTAL-MIB :: cRfSupSysBootImageAdmin

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-RF-SUPPLEMENTAL-MIB › cRfSupSysBootImageAdmin

cRfSupSysBootImageAdmin

Module: CISCO-RF-SUPPLEMENTAL-MIB

OID (symbolic): CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysBootImageAdmin

OID (numeric): 1.3.6.1.4.1.9.9.198.1.1.11

Node type: OBJECT-TYPE

Type: RfSupSyncAdminState

Access: read-write

Description: Enables/Disables automatic boot image memory syncs only. Doesn't affect other types of sync activity. If set to the default value enableAutoSync, the Active unit will send the full current boot image memory to the Standby unit(s) after any operation that affects the boot image.

This object is not applicable for systems that don't support automatic boot image memory mirroring.

Setting disableAutoSync is necessary during software upgrades for the case where the boot image memory space is too small to simultaneously hold both the old and new images.

What is cRfSupSysBootImageAdmin?

A read-write setting that enables or disables automatic synchronization of boot image memory from the Active unit to the Standby unit(s), without affecting other sync activity.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.198.1.1.11
snmpwalk -v2c -c public <target> CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysBootImageAdmin

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.198.1.1.11.1
snmpget -v2c -c public <target> CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysBootImageAdmin.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.198.1.1.11.1 s <value>

Start monitoring Cisco router/Catalyst switch with redundant supervisors/RP with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RF-SUPPLEMENTAL-MIB::cRfSupSysBootImageAdmin OID value, configure state conditions and alerts, and monitor any Cisco router/Catalyst switch with redundant supervisors/RP from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.198ciscoRfSupMIBCISCO-RF-SUPPLEMENTAL-MIB
1.3.6.1.4.1.9.9.198.1ciscoRfSupMIBObjectsCISCO-RF-SUPPLEMENTAL-MIB
1.3.6.1.4.1.9.9.198.1.1cRfSupSystemCISCO-RF-SUPPLEMENTAL-MIB
1.3.6.1.4.1.9.9.198.1.1.11cRfSupSysBootImageAdminCISCO-RF-SUPPLEMENTAL-MIB