All MIBs › CISCO-RF-SUPPLEMENTAL-MIB › cRfSupActionManualSync
cRfSupActionManualSync
Module: CISCO-RF-SUPPLEMENTAL-MIB
OID (symbolic): CISCO-RF-SUPPLEMENTAL-MIB::cRfSupActionManualSync
OID (numeric): 1.3.6.1.4.1.9.9.198.1.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable is set to invoke a one-time manual copy of the specified information type from the Active to one or more Standby units.
When read, this object returns the last command written or noAction if no action has been written to the Active unit since it was initialized. The value noAction can not be used in a write request.
The result of the last requested action can be determined by reading the value of cRfSupActionLastSyncResult. The value of the cRfSupActionManualSync object can not be changed until the cRfSupActionLastSyncResult transitions to the successful or failed state.
What is cRfSupActionManualSync?
A read-write control used to trigger a one-time manual synchronization of a specified information type from the Active unit to the Standby unit(s); reading it returns the last command issued or noAction if none has been set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.198.1.3.1 snmpwalk -v2c -c public <target> CISCO-RF-SUPPLEMENTAL-MIB::cRfSupActionManualSync
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.198.1.3.1.1 snmpget -v2c -c public <target> CISCO-RF-SUPPLEMENTAL-MIB::cRfSupActionManualSync.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.198.1.3.1.1 i <value>
Start monitoring Cisco router/Catalyst switch with redundant supervisors/RP with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RF-SUPPLEMENTAL-MIB::cRfSupActionManualSync OID value, configure state conditions and alerts, and monitor any Cisco router/Catalyst switch with redundant supervisors/RP from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.198 | ciscoRfSupMIB | CISCO-RF-SUPPLEMENTAL-MIB |
| 1.3.6.1.4.1.9.9.198.1 | ciscoRfSupMIBObjects | CISCO-RF-SUPPLEMENTAL-MIB |
| 1.3.6.1.4.1.9.9.198.1.3 | cRfSupAction | CISCO-RF-SUPPLEMENTAL-MIB |
| 1.3.6.1.4.1.9.9.198.1.3.1 | cRfSupActionManualSync | CISCO-RF-SUPPLEMENTAL-MIB |