CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB :: crepifBlockedVlans2k

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-RESILIENT-ETHERNET-PROTOCOL-MIBcrepifBlockedVlans2k

crepifBlockedVlans2k

Module: CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB

OID (symbolic): CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB::crepifBlockedVlans2k

OID (numeric): 1.3.6.1.4.1.9.9.601.1.2.1.1.10

Node type: OBJECT-TYPE

Type: CiscoVlanList

Access: read-create

Description: This object specifies the list of VLANs configured to be blocked at the alternate port for VLANs with values of 1024 through 2047. If the bit is set to '1', then the VLAN is marked for blocking.

This value is only effective on the device acting as the REP primary edge. In addition, this value is effective only if 'crepLoadBalanceBlockPortType' is not 'none'. This object is only instantiated on devices that support the extended VLANs.

What is crepifBlockedVlans2k?

Read-create bitmap specifying which VLANs numbered 1024-2047 are configured to be blocked at the alternate port; effective only on the device acting as REP primary edge.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.601ciscoResilientEthernetProtocolMIBCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
1.3.6.1.4.1.9.9.601.1ciscoRepMIBObjectsCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
1.3.6.1.4.1.9.9.601.1.2crepInterfaceConfigCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
1.3.6.1.4.1.9.9.601.1.2.1crepInterfaceConfigTableCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
1.3.6.1.4.1.9.9.601.1.2.1.1crepInterfaceConfigEntryCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
1.3.6.1.4.1.9.9.601.1.2.1.1.10crepifBlockedVlans2kCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB