CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB :: crepifBlockedVlans1k

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-RESILIENT-ETHERNET-PROTOCOL-MIBcrepifBlockedVlans1k

crepifBlockedVlans1k

Module: CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB

OID (symbolic): CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB::crepifBlockedVlans1k

OID (numeric): 1.3.6.1.4.1.9.9.601.1.2.1.1.9

Node type: OBJECT-TYPE

Type: CiscoVlanList

Access: read-create

Description: This object specifies the list of VLANs configured to be blocked at the alternate port for VLANs with values of 0 through 1023. If the bit is set to '1', then the VLAN is marked for blocking.

This value is only effective on the device acting as the REP primary edge. In addition, this value is effective only if 'crepLoadBalanceBlockPortType' is not 'none'.

What is crepifBlockedVlans1k?

Read-create bitmap specifying which VLANs numbered 0-1023 are configured to be blocked at the alternate port; effective only on the device acting as REP primary edge.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.601ciscoResilientEthernetProtocolMIBCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
1.3.6.1.4.1.9.9.601.1ciscoRepMIBObjectsCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
1.3.6.1.4.1.9.9.601.1.2crepInterfaceConfigCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
1.3.6.1.4.1.9.9.601.1.2.1crepInterfaceConfigTableCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
1.3.6.1.4.1.9.9.601.1.2.1.1crepInterfaceConfigEntryCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
1.3.6.1.4.1.9.9.601.1.2.1.1.9crepifBlockedVlans1kCISCO-RESILIENT-ETHERNET-PROTOCOL-MIB