All MIBs › CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB › crepIfStcnPropagateToIf
crepIfStcnPropagateToIf
Module: CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
OID (symbolic): CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB::crepIfStcnPropagateToIf
OID (numeric): 1.3.6.1.4.1.9.9.601.1.2.1.1.19
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-create
Description: This object specifies the interface to which the REP edge should propagate the segment topology change notifications. The interface should be of type ifType = 'ethernetCsmacd' or an ethernet based virtual port with ifType = 'propVirtual'. '0' specifies that the device should not propagate STCNs to any interface.
This value is only effective on the device acting as the REP primary edge.
What is crepIfStcnPropagateToIf?
Specifies which Ethernet (or virtual Ethernet) interface should receive propagated REP topology change notifications, with a value of 0 meaning no specific interface is designated.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.601 | ciscoResilientEthernetProtocolMIB | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.9.601.1 | ciscoRepMIBObjects | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.9.601.1.2 | crepInterfaceConfig | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.9.601.1.2.1 | crepInterfaceConfigTable | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.9.601.1.2.1.1 | crepInterfaceConfigEntry | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.19 | crepIfStcnPropagateToIf | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |